RASDAT`10 IEEE International Workshop on Reliability Aware
System Design and Test (In
conjunction with the International Conference on VLSI Design) Bangalore,
India January 7-8, 2010 |
|||||||||
Organizing
Committee General Co-Chairs Adit Singh ( Virendra Singh ( General Vice Co-Chairs Michiko Inoue (NAIST, JP) Sreejit Chakravarty ( Program Co-Chairs Erik Larsson ( Rubin
Parekhji (TI, IN) Program Vice
Co-Chairs Ilia Polian ( MS Gaur (MNIT, IN) Organizing Committee Co-Chairs Bhargab Bhattacharya (ISI, IN) SK Nandy ( Publication Chair V. Kamakoti (IITM, IN) Finance Chair Pradip Thaker (ADI, IN) Publicity Chair: Susanta Chakravarty (BESU, IN) Local Arrangement chair Suraj Sindia (ADI, IN) Viney Kumar (nVidia, IN) Website management chair Sushil Kabra (BSNL, IN) Registration Chair Jaynarayan Tudu ( Steering
Committee: K.K. Saluja (US) – Chair
Program
Committee:
|
Even as advances in
CMOS technology come up against physical limits of material properties and
lithography, raising many new challenges that must be overcome to ensure IC
quality and reliability, there appears to be no obvious alternate technology
that can replace End-of-Roadmap CMOS over the next decade. However, many
reliability challenges from increasing defect rates, manufacturing
variations, soft errors, wearout, etc. will need to be addressed by
innovative new design and test methodologies if device scaling is to continue
on track as per Moore`s Law to 10nm and beyond. The key
objective of this annual workshop, planned to be held in conjunction with the
International Conference on VLSI Design, is to provide an informal forum for
vigorous creative discussion and debate of this area. The aim is to encourage
the presentation and discussion of truly innovative and `out-of-the-box`
ideas that may not yet have been fully developed for presentation at reviewed
conferences to address these challenges. Additionally, the workshop invites
embedded talks and tutorials on cutting edge topics related to reliability
aware design of CMOS and hybrid nanotechnology systems. Representative topics include, but
are not limited to:
Submissions Authors are invited to
submit previously unpublished technical proposals. The proposals must be full
papers not to exceed 6 pages. Each submission should include: title, full
name and affiliation of all authors, a short abstract of 50 words, and 6 to 7
keywords. Also, identify a contact author and include a complete
correspondence address, phone number, fax number, and e-mail address. Submit
a copy of your proposal in PDF either online submission via workshop website http://www.serc.iisc.ernet.in/~viren/RASDAT/
or via e-mail to : rasdat2010@easychair.org,
rasdat2010@serc.iisc.ernet.in Submissions are due no
later than November 17, 2009.
Authors will be notified of the disposition of their presentation by November 30, 2009 Authors of accepted presentations
must submit the final paper by December 15, 2009 for inclusion in the Workshop Proceedings,
which will be provided to the attendees. Website: http://www.serc.iisc.ernet.in/~viren/RASDAT/ General Information
|