IEEE International Workshop on Reliability Aware
System Design and Test (In
conjunction with the International Conference on VLSI Design) |
|||||||||
Organizing
Committee General Co-Chairs Adit Singh ( Virendra Singh ( General Vice Co-Chairs Michiko Inoue (NAIST, JP) Sreejit Chakravarty ( Program Co-Chairs Erik Larsson ( Rubin
Parekhji (TI, IN) Program Vice
Co-Chairs Ilia Polian ( MS Gaur (MNIT, IN) Organizing Committee Co-Chairs Bhargab Bhattacharya (ISI, IN) V Kamakoti (IITM, IN) Publication Chair Vijay Laxmi (MNIT, IN) Finance Chair Pradip Thaker ( S. Ramakrishnan (WT, IN) Publicity Chair: Susanta Chakravarty (BESU, IN) Local Arrangement chair TBD Website management chair Sushil Kabra (BSNL, IN) Registration Chair Jaynarayan Tudu ( Steering
Committee: K.K. Saluja (US) – Chair
Program
Committee:
|
Even as advances in CMOS technology come up against
physical limits of material properties and lithography, raising many new
challenges that must be overcome to ensure IC quality and reliability, there
appears to be no obvious alternate technology that can replace End-of-Roadmap
CMOS over the next decade. However, many reliability challenges from
increasing defect rates, manufacturing variations, soft errors, wearout, etc.
will need to be addressed by innovative new design and test methodologies if
device scaling is to continue on track as per Moore`s Law to 10nm and beyond.
The
key objective of this annual workshop, planned to be held in conjunction with
the International Conference on VLSI Design, is to provide an informal forum
for vigorous creative discussion and debate of this area. The aim is to
encourage the presentation and discussion of truly innovative and
`out-of-the-box` ideas that may not yet have been fully developed for
presentation at reviewed conferences to address these challenges. Additionally,
the workshop invites embedded talks and tutorials on cutting edge topics
related to reliability aware design of CMOS and hybrid nanotechnology
systems. Representative
topics include, but are not limited to:
Submissions Authors
are invited to submit previously unpublished technical proposals. The
proposals must be full papers not to exceed 6 pages. Each submission should
include: title, full name and affiliation of all authors, a short abstract of
50 words, and 6 to 7 keywords. Also, identify a contact author and
include a complete correspondence address, phone number, fax number, and
e-mail address. Submit a copy of your proposal in PDF either online
submission via workshop website http://www.serc.iisc.ernet.in/~viren/RASDAT11/
or via e-mail to : rasdat2011@easychair.org,
rasdat2011@serc.iisc.ernet.in Submissions
are due no later than October 15, 2010 (EXTENDED). Authors will be
notified of the disposition of their presentation by October 31,
2010 Authors of accepted papers must submit the final paper
by November 30, 2010 for
inclusion in the Workshop Proceedings, which will be provided to the
attendees. Website:
http://www.serc.iisc.ernet.in/~viren/RASDAT11/ General Information
|