Publications

We set high standards for ourselves, for sharing our research findings through peer-reviewed papers published in reputed journals and presented at international conferences. This page containts a list of publications from the group, with links to papers on publishers’ websites.

Patents

Journals and Conference Proceedings

[J] – Journal papers, [C] – Conference papers, [P] – pre-prints

 – GitHub source code available

#shm Structural health monitoring; #cbm Condition based monitoring; #biochem Bio/chemical sensors; #mems MEMS; #photonics Photonics; #cas Circuits & systems; #robotics Robotics; #quant Quantum sensing

2024

• [P] Ramana Raja B., Rohan Soman, Siddharth Tallur and Sauvik Banerjee, “Determining the approximate boundaries of multiple damages in a honeycomb sandwich using convex hull algorithm,” Available at SSRN: DOI: 10.2139/ssrn.4761580 (2024). #shm
• [P] Sheetal Patil, Sauvik Banerjee and Siddharth Tallur, “Smart structural health monitoring (SHM) system for on-board localization of defects in pipes using torsional ultrasonic guided waves,” arxiv:2403.11110 (2024). #shm
• [P] Himanshu Kumar, Dasika Shishir, Maheshwar Mangat, Siddharth Tallur and Kasturi Saha, “High dynamic-range and portable magnetometer using ensemble nitrogen-vacancy centers in diamond,” arXiv:2402.15748 (2024). #quant
• [J53] Pankhi Kashyap, Kajal Shivgan, Sheetal Patil, Ramana Raja B, Sagar Mahajan, Sauvik Banerjee and Siddharth Tallur, “Unsupervised deep learning framework for temperature-compensated damage assessment using ultrasonic guided waves on edge device,” Scientific Reports 14, 3751 (2024). #shm (pre-print)
• [C52] Sheetal Patil, Sauvik Banerjee and Siddharth Tallur, “Torsional ultrasonic guided wave-based smart SHM system for locating defects in pipes,” to be presented at 2024 IEEE South Asian Ultrasonics Symposium (SAUS), Gandhinagar, India (2024). #shm
• [J52] Shruti Ahuja, Siddharth Tallur and Kiran Kondabagil, “Simultaneous microbial capture and nucleic acid extraction from wastewater with minimal pre-processing and high recovery efficiency,” Science of The Total Environment vol. 98, 170347 (2024). #biochem
• [C51] Ankur Agarwal, Kajal Shivgan, Supriya Ingle and Siddharth Tallur, “Live demonstration: a non-invasive and handheld detector for characterizing steel rebars in concrete,” presented at IEEE APSCON 2024, Goa, India. #shm
• [C50] Ankur Agarwal, Kajal Shivgan, Supriya Ingle and Siddharth Tallur, “A non-invasive and handheld detector for characterizing steel rebars in concrete,” Proceedings of IEEE APSCON 2024, Goa, India, January 2024. #shm
• [C49] Susmita Rath*, Hardik Ghoshal*, Poulami Mandal, Pankhi Kashyap, Laxmeesha Somappa and Siddharth Tallur, “Electromyography (EMG) based quadruped robot telemanipulation,” Proceedings of IEEE APSCON 2024, Goa, India, January 2024. (*equal contribution) #robotics
•  [C48] Poulami Mandal*, Vivekanand Dhakane*, Avani Kulkarni and Siddharth Tallur, “WELPCR: Low-cost polymerase chain reaction (PCR) thermal cycler for nucleic acid amplification and sensing,” Proceedings of IEEE APSCON 2024, Goa, India, January 2024. (*equal contribution) #biochem (bioRxiv preprint; Design resources available here: GitHub)
  
• [J51] Ruchira Nandeshwar and Siddharth Tallur, “Electrochemical detection of myeloperoxidase (MPO) in blood plasma with surface-modified electroless nickel immersion gold (ENIG) printed circuit board (PCB) electrodes,” Biosensors and Bioelectronics vol. 246, 115891 (2024). #biochem (medRxiv preprint)

2023

• [C47] Anju Joshi*, Ruchira Nandeshwar* and Siddharth Tallur, “Electrochemical biosensing of myeloperoxidase in undiluted serum on screen printed electrodes using PEG coated hierarchical gold nanostructures,” Proceedings of 2023 IEEE Sensors Conference, Vienna, Austria, October 2023. (*equal contribution) #biochem
• [C46] Pankhi Kashyap, Hardik Ghoshal and Siddharth Tallur, “A framework for seamless trajectory estimation and navigation of robotic sensor platform with resource-constrained embedded controller,” Proceedings of 2023 IEEE Sensors Conference, Vienna, Austria, October 2023. #robotics
• [C45] Ramana Raja B., Sauvik Banerjee and Siddharth Tallur, “The effect of temperature on guided wave signal characteristics in a honeycomb composite sandwich structure with disbond and delamination,” presented at 14th International Workshop on Structural Health Monitoring (IWSHM), Stanford University, CA, USA, September 2023. #shm
• [J50] Padmalochan Panda, Soumyadip Chatterjee, Siddharth Tallur and Apurba Laha, “Beyond 5 GHz excitation of a ZnO-based high-overtone bulk acoustic resonator on SiC substrate,” Scientific Reports 13, 13329 (2023). #mems
• [J49] Supriya Asutkar and Siddharth Tallur, “An explainable unsupervised learning framework for scalable machine fault detection in Industry 4.0,” Measurement Science and Technology 34, 105123 (2023). #cbm
• [C44] Shruti Ahuja, Maria D’costa, Avani Kulkarni, Kiran Kondabagil and Siddharth Tallur, “RNAStick: Hassle-free dipstick based RNA isolation from wastewater,” presented at MicroTAS 2023 (27th International Conference on Miniaturized Systems for Chemistry and Life Sciences), Katowice, Poland, October 2023. #biochem
• [J48] Ramana Raja B., Sheetal Patil, Pankhi Kashyap, Siddharth Tallur and Sauvik Banerjee, “The effect of temperature on guided wave signal characteristics in presence of disbond and delamination for health monitoring of a honeycomb composite sandwich structure with built-in PZT network,” Smart Materials and Structures, vol. 32, no. 9, 095003 (2023). #shm
• [J47] Ruchira Nandeshwar, Avani Kulkarni, Shruti Ahuja, M. Santhosh Kumar, Debjani Paul, Kiran Kondabagil and Siddharth Tallur, “Portable absorbance platform for sensing of viral and bacterial nucleic acid leveraging intercalation with methylene blue: application for wastewater-based epidemiology,” vol. 14, 100373, Biosensors and Bioelectronics: X (2023). #biochem
• [J46] Ruchira Nandeshwar, Poulami Mandal and Siddharth Tallur, “Portable and low-cost colorimetric sensor for detection of urea in milk samples,” IEEE Sensors Journal, vol. 23, no. 14, pp. 16287-16292 (2023). #biochem
• [C43] Parijat Deshpande, Debankita De, Siddharth Tallur, Debjani Paul and Beena Rai, “High throughput screening of bioreceptors for developing a wearable cortisol biosensor,” presented at 33rd Anniversary World Congress on Biosensors (Biosensors 2023), Busan, Korea, June 2023. #biochem
• [C42] Ruchira Nandeshwar and Siddharth Tallur, “Electrochemical sensing of myeloperoxidase with MWCNT-Au nanoparticles modified printed circuit board electrodes,” presented at 33rd Anniversary World Congress on Biosensors (Biosensors 2023), Busan, Korea, June 2023. #biochem
• [J45] Supriya Asutkar and Siddharth Tallur, “Deep transfer learning strategy for efficient domain generalisation in machine fault diagnosis,” Scientific Reports 13, 6607 (2023). #cbm
• [C41] Sheetal Patil, Sagar Mahajan, Sauvik Banerjee and Siddharth Tallur, “An embedded SHM system for monitoring of pipelines using torsional guided wave ultrasonics,” Proceedings of 2023 Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum (2023 IFCS-EFTF), Toyama, Japan, May 2023. #shm
• [C40] Pankhi Kashyap, Kajal Shivgan, Sheetal Patil, Sagar Mahajan, Sauvik Banerjee and Siddharth Tallur, “TinyML-enabled unsupervised ultrasonic guided wave SHM under varying thermal conditions,” Proceedings of 2023 Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum (2023 IFCS-EFTF), Toyama, Japan, May 2023. #shm
• [C39] Aparajita Modak, Ayan Majumder, Madhur Parashar, Siddharth Tallur and Kasturi Saha, “Few NV center nanodiamonds enable high-speed and high-resolution sensing of paramagnetic species,” Proceedings of 2023 Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum (2023 IFCS-EFTF), Toyama, Japan, May 2023. #quant
•  [J44] Aryan Lall and Siddharth Tallur, “Deep reinforcement learning-based pairwise DNA sequence alignment method compatible with embedded edge devices,” Scientific Reports 13, 2773 (2023). #cas (Source code available here: GitHub EdgeAlign, GitHub TFLite-Micro-Accelerator)
  
•  [J43] Shruti Sawant, Amit Sethi, Sauvik Banerjee and Siddharth Tallur, “Unsupervised learning framework for temperature compensated damage identification and localization in ultrasonic guided wave SHM with transfer learning,” Ultrasonics, vol. 130, 106931 (Elsevier) (2023). #shm (Source code available here: GitHub)
  
• [J42] Ramana Raja B., Siddharth Tallur and Sauvik Banerjee, “Study of ultrasonic guided wave interaction with core crush damage for NDE of a honeycomb composite sandwich panel,” ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, vol. 6(1), 011003 (2023). #shm
• [C38] Sourin Ghosh, Yogesh Gholap and Siddharth Tallur, “Wearable sensing module for table tennis stroke detection,” Proceedings of 2023 IEEE Applied Sensing Conference (APSCON), Bengaluru, India, Jan 2023.
• [J41] Supriya Asutkar, Chaitravi Chalke, Kajal Shivgan and Siddharth Tallur, “TinyML-enabled edge implementation of transfer learning framework for domain generalization in machine fault diagnosis,” Expert Systems With Applications, vol. 213, part B, 119016 (2023). #cbm

2022

• [J40] Shanmukha Shetty, Sauvik Banerjee, Siddharth Tallur and Yogesh M. Desai, “Real-time monitoring of residual strength in corroding steel reinforcement using ultrasonic guided waves and multi-physics modelling,” Journal of Adhesion Science and Technology, pp. 1-20, DOI: 10.1080/01694243.2022.2159292 (2022). #shm
• [J39] Parijat Deshpande, Bharath Ravikumar, Siddharth Tallur, Debjani Paul and Beena Rai, “Development of an insilico model of eccrine sweat using molecular modelling techniques,” Scientific Reports 12, 20263 (2022). #biochem
• [J38] Shanmukha Shetty, Sauvik Banerjee, Siddharth Tallur and Yogesh M. Desai, “Effectiveness of multi-physics numerical model in simulating accelerated corrosion with spatial and temporal non-uniformity,” Surface Topography: Metrology and Properties 10, 045012 (2022). #shm
• [J37] Ruchira Nandeshwar, Mani Pujitha Illa, Mudrika Khandelwal and Siddharth Tallur, “Enzymatic degradation of bacterial cellulose derived carbon nanofibers (BC-CNF) by myeloperoxidase (MPO): Performance evaluation for biosensing,” Biosensors and Bioelectronics: X, vol. 12, 100252 (2022). #biochem
• [J36] Shanmukha Shetty, Sauvik Banerjee, Siddharth Tallur and Yogesh M. Desai, “Point cloud-based finite element model for interaction of ultrasonic guided waves with non-uniform corrosion in reinforced concrete,” Journal of Nondestructive Evaluation, vol. 41, 67 (2022). #shm
• [C37] Ruchira Nandeshwar, Avani Kulkarni, Shruti Ahuja, M. S. Kumar, Kiran Kondabagil and Siddharth Tallur, “Low-cost colorimetric alternative of qPCR for DNA sensing based on intercalation with methylene blue,” 2022 IEEE Sensors Conference, Dallas TX, USA, pp. 1-4, Oct-Nov 2022. #biochem
• [J35] Jeslin Thalapil, Shruti Sawant, Siddharth Tallur and Sauvik Banerjee, “Guided wave based localization and severity assessment of in-plane and out-of-plane fiber waviness in carbon fiber reinforced composites,” Composite Structures, vol. 297, 115932 (2022). #shm
• [J34] Durgesh Tamhane, Jeslin Thalapil, Sauvik Banerjee and Siddharth Tallur, “Performance evaluation of electro-mechanical impedance based state of health estimation of sacrificial anodes in reinforced concrete structures,” Construction and Building Materials, vol. 342, Part B, 128034 (2022). #shm
• [C36] Parijat Deshpande, Bharath Ravikumar, Siddharth Tallur, Debjani Paul and Beena Rai, “Eccrine sweat molecular model for development of de novo biosensors,” Proceedings of the 44^th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), pp. 914-917, July 2022. #biochem
• [C35] Shanmukha Shetty, Sauvik Banerjee, Siddharth Tallur and Yogesh M. Desai, “Real-time monitoring of residual strength in corroding steel reinforcement using ultrasonic guided waves and multi-physics modelling,” CASP-2022: 2^nd International Conference on Corrosion and Surface Protection for Steel, Organized by the Turkish Constructional Steelwork Association (TUCSA), Turkey, Istanbul, in coordination with the European Convention for Constructional Steelwork (ECCS), May 2022. #shm
• [J33] Shruti Ahuja*, M. Santhosh Kumar*, Ruchira Nandeshwar, Kiran Kondabagil and Siddharth Tallur, “Longer amplicons provide better sensitivity for electrochemical sensing of viral nucleic acid in water samples using PCB electrodes,” Scientific Reports 12, 8814 (2022). (*equal contribution) #biochem
• [J32] Vaibhav Malviya, Indrani Mukherjee and Siddharth Tallur, “Edge-compatible convolutional autoencoder implemented on FPGA for anomaly detection in vibration condition-based monitoring,” IEEE Sensors Letters, vol. 6, no. 4, Art. no. 7001104 (2022). #cbm
  
• [J31] Shruti Sawant, Sheetal Patil, Jeslin Thalapil, Sauvik Banerjee and Siddharth Tallur, “Temperature variation compensated damage classification and localisation in ultrasonic guided wave SHM using self-learnt features and Gaussian mixture models,” Smart Materials and Structures, vol. 31, no. 5, 055008 (2022). #shm
  
• [J30] Durgesh Tamhane, Sauvik Banerjee and Siddharth Tallur, “Monitoring corrosion in sacrificial anodes with pulsed eddy current and electromechanical impedance: A comparative analysis,” IEEE Sensors Journal, vol. 22, no. 8, pp. 8147-8154 (2022). #shm
• [J29] Sanjoli Narang and Siddharth Tallur, “Field programmable gate array (FPGA) based programmable digital emulator of vibratory micro-electro-mechanical systems (MEMS) gyroscopes,” Review of Scientific Instruments 93, 035003 (2022). #cas #mems
• [J28] Ruchira Nandeshwar, Marwan Malik, Maria D’costa, Maheshwar Mangat, Mahesh A. Bhaganagare, Madhumita P. Date and Siddharth Tallur, “Molecular imprinting with polyaniline on ENIG finish PCB electrodes for electrochemical detection of melamine,” IEEE Sensors Journal, vol. 22, no. 3, pp. 1898-1904 (2022). #biochem
• [J27] Supriya Asutkar, Mallikarjuna Korrapati, Sagar Singh, Dipti Gupta and Siddharth Tallur, “Performance evaluation of post-curing method for sensitivity enhancement of elastomer vibration sensors,” Sensors and Actuators A: Physical, vol. 334, 113313 (2022). #cbm

2021

• [J26] Ruchira Nandeshwar, M. Santhosh Kumar, Kiran Kondabagil and Siddharth Tallur, “Electrochemical immunosensor platform using low-cost ENIG PCB finish electrodes: Application for SARS-CoV-2 spike protein sensing,” IEEE Access, vol. 9, pp. 154368-154377 (2021). #biochem
• [J25] Durgesh Tamhane, Jinit Patil, Sauvik Banerjee and Siddharth Tallur, “Feature engineering of time-domain signals based on principal component analysis for rebar corrosion assessment using pulse eddy current,” IEEE Sensors Journal vol. 21, no. 19, pp. 22086-22093 (2021). The Hindu Business Line, ResearchMatters article, IIT Bombay research highlight #shm
  
• [J24] Pallabi Das, Kasturi Saha and Siddharth Tallur, “Dispersion engineering of GaN based coupled waveguides for blue frequency combs,” Journal of Optics (IOP Publishing) vol. 23, no. 9, 095001 (2021). #photonics
• [J23] Indrani Mukherjee and Siddharth Tallur, “Light-weight CNN enabled edge-based framework for machine health diagnosis,” IEEE Access, vol. 9, pp. 84375-84386 (2021). #cbm
  
• [J22] M. S. Kumar*, Ruchira Nandeshwar*, Shailesh B. Lad, Kirti Megha, Maheshwar Mangat, Adrian Butterworth, Charles W. Knapp, Mara Knapp, Paul A. Hoskisson, Damion K. Corrigan, Andrew C. Ward, Kiran Kondabagil** and Siddharth Tallur**, “Electrochemical sensing of SARS-CoV-2 amplicons with PCB electrodes,” Sensors and Actuators B: Chemical, vol. 343, 130169 (2021). (*equal contribution, **corresponding authors); Press coverage: Times of India, Hindustan Times, The Hindu, New Indian Express, The Wire Science, Economic Times, Tribune India, News18, India Today, Outlook India, Financial Express, Livemint, Biospectrum India, NDTV, Phys.org and various other outlets. #biochem
  
• [C34] Sanjoli Narang and Siddharth Tallur, “A reconfigurable hardware emulator of MEMS gyroscopes with built-in error source models,” 2021 Joint Conference of the European Frequency & Time Forum & IEEE International Frequency Control Symposium (EFTF-IFCS) online conference, July 2021. (finalist for best student paper award) #mems #cas
  
• [C33] Jeslin Thalapil, Durgesh Tamhane, Sauvik Banerjee and Siddharth Tallur, “Corrosion monitoring of sacrificial anodes based on contour plot analysis of electro-mechanical impedance spectra,” Proceedings of the 21^st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers) 2021, pp. 1182-1185, June 2021. #shm
• [J21] Shruti Sawant, Sauvik Banerjee and Siddharth Tallur, “Performance evaluation of compressive sensing based lost data recovery using OMP for damage index estimation in ultrasonic SHM,” Ultrasonics, vol. 115, 106439 (2021). #shm
• [J20] Arathy Varghese, Pallabi Das and Siddharth Tallur, “A complete analytical model for MOS-HEMT biosensors: Capturing the effect of Stern layer and charge screening on sensor performance,” IEEE Sensors Letters, vol. 5, no. 4, pp. 1-4, Art no. 2000504 (2021). #biochem
• [J19] Jeslin Thalapil, Durgesh Tamhane, Sauvik Banerjee and Siddharth Tallur, “Vibration-based inverse graphical technique for thickness estimation of bulk acoustic wave (BAW) resonators: Application for corrosion monitoring of sacrificial anodes,” Smart Materials and Structures (IOP Publishing), vol. 30, 055015 (2021). #shm
  
• [C32] Pallabi Das, Kasturi Saha and Siddharth Tallur, “Anomalous dispersion in blue wavelength range in vertically coupled III-nitride waveguides,” presented at CLEO 2021 virtual conference, May 2021. #photonics
• [J18] Durgesh Tamhane, Jeslin Thalapil, Sauvik Banerjee and Siddharth Tallur, “Smart cathodic protection system for real-time quantitative assessment of corrosion of sacrificial anode based on Electro-Mechanical Impedance (EMI),” IEEE Access, vol. 9, pp. 12230-12240 (2021). #shm
• [J17] Ruchira Nandeshwar and Siddharth Tallur, “Integrated low cost optical biosensor for high resolution sensing of myeloperoxidase (MPO) activity through carbon nanotube degradation,” IEEE Sensors Journal, vol. 21, no. 2, pp. 1236-1243 (2021). #biochem

2020

• [J16] Supriya Asutkar, Mallikarjuna Korrapati, Dipti Gupta and Siddharth Tallur, “Novel elastomer vibration sensor for machine health monitoring applications,” IEEE Sensors Letters, vol. 4, no. 11, pp. 1-4, Art no. 2501404 (2020). #cbm
•  [J15] Pallabi Das, Shlok Vaibhav Singh and Siddharth Tallur, “Design and analysis of electro-optic modulators based on high contrast gratings (HCGs) in AlGaN/GaN heterostructures,” Semiconductor Science and Technology (IOP Publishing), 35.12, 125022 (2020). (Source code available here: GitHub) #photonics
• [C31] Shruti Sawant, Sauvik Banerjee and Siddharth Tallur, “Compressive sensing based data-loss recovery enables robust estimation of damage index in ultrasonic structural health monitoring,” 2020 IEEE Sensors Conference, Rotterdam, Netherlands, pp. 1-4, October 2020. #shm
  
• [J14] Pallabi Das, Tian-Li Wu and Siddharth Tallur, “Design and analysis of high electron mobility transistor (HEMT) inspired III-V electro-optic modulator topologies,” Semiconductor Science and Technology (IOP Publishing), 35, 095028 (2020). #photonics
• [J13] Ayan Majumder, Subrat Kumar Pradhan, Kasturi Saha and Siddharth Tallur, “Low cost passive pH sensor fabricated on Scotch^TM tape,” IEEE Sensors Letters, vol. 4, no. 4, pp. 1-4, Art no. 2000204 (2020). #biochem

2019

• [C30] Indrani Mukherjee, Jinit Patil, Sauvik Banerjee and Siddharth Tallur, “Phase sensitive detection of extent of corrosion using Anisotropic Magnetoresistive (AMR) sensor in steel reinforcing bars (rebars),” presented at Conference on Non-Destructive Evaluation (NDE 2019), Bangalore, India, December 2019. #shm
• [C29] Durgesh Tamhane, Sauvik Banerjee and Siddharth Tallur, “Noninvasive detection of extent of corrosion in steel reinforcing bars by magnetic force measurement,” presented at Conference on Non-Destructive Evaluation (NDE 2019), Bangalore, India, December 2019. #shm
• [C28] Durgesh Tamhane and Siddharth Tallur, “Study of rebar localization in concrete based on magnetic reluctance technique using COMSOL Multiphysics,” presented at the COMSOL Conference, Bangalore, India, November 2019. #shm
• [C27] Kiran Dhope and Siddharth Tallur, “Co-simulation framework in COMSOL Multiphysics for displacement of a MEMS cantilever using a depletion Schottky transducer,” presented at the COMSOL Conference, Bangalore, India, November 2019. #mems
• [J12] Keyur Mistry, Sudeshna Dash and Siddharth Tallur, “Audio encryption through synchronization of chaotic oscillator circuits: Teaching non-linear dynamics through simple electrical circuits,” American Journal of Physics 87, 1004 (2019). #cas
• [C26] Shruti Sawant, Indrani Mukherjee, Siddharth Tallur and Animesh Kumar, “Feasibility assessment of location-unaware sensing for estimation of non-bandlimited measurements,” 2019 IEEE Sensors Conference, Montreal, Canada, pp. 1-4, October 2019.
• [C25] Hrishikesh Iyer and Siddharth Tallur, “Study of angular gain in lobe-like modes for annular ring bulk acoustic wave (BAW) gyroscopes,” presented at the 2019 IEEE International Ultrasonics Symposium, Glasgow, Scotland, October 2019. #mems
• [J11] Cijy Mathai, Sunil A. Bhave and Siddharth Tallur, “Modeling the colors of phase noise in optomechanical oscillators,” OSA Continuum 2(7), pp. 2253-2259 (2019). #photonics #mems
• [C24] Kiran Dhope and Siddharth Tallur, “Equivalent force analysis of a Schottky depletion layer MEMS actuator,” presented at the 2019 Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum, Orlando FL, USA, April 2019. #mems
• [C23] Supriya Asutkar, Dipti Gupta and Siddharth Tallur, “Machine health monitoring using a novel low cost elastomer based vibration sensor,” presented at the 2019 Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum, Orlando FL, USA, April 2019. #cbm
• [C22] Keyur Mistry, Sudeshna Dash and Siddharth Tallur, “Synchronization of chaotic oscillators using partial state space linear control,” 2019 APS March meeting, Boston MA, USA, March 2019. #cas
• [C21] Cijy Mathai and Siddharth Tallur, “Modeling the adsorption-desorption phase noise in optomechanical oscillators,” 2019 APS March meeting, Boston MA, USA, March 2019. #photonics
• [C20] Pallabi Das and Siddharth Tallur, “Ultra-fast electro-optic modulators based on plasma dispersion effect of 2DEG in III-V heterostructures,” 2019 APS March meeting, Boston MA, USA, March 2019. #photonics

2018

• [C19] Kiran Dhope and Siddharth Tallur, “Analytical model for monitoring of AFM tip wear through resonance frequency measurements,” presented at the 4th IEEE International Conference on Emerging Electronics (ICEE), Bangalore, India, December 2018. #mems
• [C18] Ruchira Nandeshwar, Nidhi Maheshwari and Siddharth Tallur, “Precision low cost phase sensitive optical sensor for detecting carbon nanoparticle degradation,” presented at IEEE Sensors Conference, New Delhi, India, October 2018. (Best student paper award) #biochem
• [J10] Jeffin Joy, Madhumita P. Date, Brij Mohan Arora, K. L. Narasimhan and Siddharth Tallur, “Capacitance-voltage profiling of MOS capacitors: A case study of hands-on semiconductor testing for an undergraduate laboratory,” American Journal of Physics 86, 787 (2018). (Featured on journal cover) #mems
  
• [C17] Priyanka Roy, Pallabi Das and Siddharth Tallur, “Hybrid numerical-analytical Effective Index Method for designing large geometry ridge waveguides,” presented at the 31st IEEE Photonics Conference, Reston VA, USA, October 2018. #photonics
• [C16] Dhananjay Patel, Siddharth Tallur and Upena Dalal, “Assessment of RB noise in bidirectional RoF based on different O-OFDM SSB systems,” presented at the 31st IEEE Photonics Conference, Reston VA, USA, October 2018. #photonics

2017

• [C15] Reshma Ajith, Amit Tewari, Dipti Gupta and Siddharth Tallur, “Low cost foam based vibration sensor for condition based monitoring,” presented at the 19th International Workshop on The Physics of Semiconductor Devices (IWPSD 2017), New Delhi, India, Dec 2017. #cbm
• [C14] Ambika Shanker Shukla and Siddharth Tallur, “Feasibility analysis of Acoustic Bragg Reflectors for unreleased opto-mechanical resonators,” presented at the 19th International Workshop on The Physics of Semiconductor Devices (IWPSD 2017), New Delhi, India, Dec 2017. #photonics #mems
• [J9] Reshma Ajith, Amit Tewari, Dipti Gupta and Siddharth Tallur, “Low cost vibration sensor for condition based monitoring manufactured from polyurethane foam,” IEEE Sensors Letters 1(6), pp. 1-4 (2017). (Press coverage) #cbm
  
• [C13] Pallabi Das and Siddharth Tallur, “Spin-coated piezoelectric-polymer composite based acoustic resonators and transducers,” presented at 2017 Joint Meeting of European Frequency & Time Forum and IEEE International Frequency Control Symposium (EFTF-IFCS 2017), Besancon, France, July 9-13, 2017. (finalist for best student paper award) #mems
  

  Pre-group: STallur’s publications before joining IIT Bombay
  

  Technical articles

  • #mems Siddharth Tallur, “Measuring AC accelerations: To calibrate or not to calibrate?,” Analog Devices Inc. (2017).
  • #mems Anthony Desimone and Siddharth Tallur, “Elusive tones: Aliasing effects in digital MEMS accelerometers in condition monitoring,” Analog Devices Inc. (2017).
  • #mems Siddharth Tallur, “Achieving best noise performance with the ADXL1002,” (white paper on design considerations in instrumentation for noise measurements in MEMS accelerometers) Analog Devices Inc. (2017).

  2016

  • [C12] Siddharth Tallur and Sunil A. Bhave, “Extremely wide tuning range of mechanical oscillation of a silicon waveguide driven by optical gradient force,” 2016 Solid State Sensor, Actuator and Microsystems Workshop (Hilton Head 2016), Hilton Head Island, South Carolina, pp. 5-8 (2016). #photonics #mems

  2015

  • [C11] Siddharth Tallur and Sunil A. Bhave, “Non-linear dynamics in optomechanical oscillators,” 18th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers’15), Anchorage, AK, pp. 993-996 (2015). #photonics #mems
  • [J8] Siddharth Tallur and Sunil A. Bhave, “Partial gap transduced MEMS opto-acoustic oscillator beyond GHz,” IEEE Journal of Microelectromechanical Systems 24(2), pp. 422-430 (2015). #photonics #mems

  2014

  • [C10] Matthew J. Storey, Siddharth Tallur and Sunil A. Bhave, “Radiation pressure enhanced opto-acoustic oscillator,” 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014), San Francisco, California, pp. 1209-1212 (2014). #photonics #mems

  2013

  • [J7] Siddharth Tallur and Sunil A. Bhave, “Rayleigh scattering boosted multi-GHz displacement sensitivity in whispering gallery opto-mechanical resonators,” Optics Express 21, pp. 27780-27788 (2013). #photonics #mems
  • [J6] Siddharth Tallur and Sunil A. Bhave, “A silicon electromechanical photodetector,” Nano Letters 13(6), pp. 2760-2765 (2013). #photonics #mems
  • [C9] Siddharth Tallur and Sunil A. Bhave, “Monolithic 2 GHz electrostatically actuated MEMS oscillator with opto-mechanical frequency multiplier,” 17th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers’13), Barcelona, Spain, pp. 1472-1475 (2013). #photonics #mems
  • [C8] Siddharth Tallur and Sunil A. Bhave, “Comparison of f-Q scaling in wineglass and radial modes in ring resonators,” 26th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2013), Taipei, Taiwan, pp. 777-780 (2013). #mems

  2012

  • [J5] Siddharth Tallur and Sunil A. Bhave, “Electro-mechanically induced GHz rate optical frequency modulation in silicon,” IEEE Photonics Journal 4(5) 1474-1483 (2012). #photonics #mems
  • [C7] Siddharth Tallur and Sunil A. Bhave, “Acousto-optic frequency modulator,” 2012 Solid State Sensor, Actuator and Microsystems Workshop (Hilton Head 2012), Hilton Head Island, South Carolina, pp. 92-93 (2012). #photonics #mems
  • [C6] Siddharth Tallur and Sunil A. Bhave, “Electro-mechanically induced GHz rate optical frequency modulation in silicon,” IEEE Photonics Conference, Burlingame CA, pp. 258-259 (2012). (best student paper award) #photonics #mems
    
  • [J4] Siddharth Tallur and Sunil A. Bhave, “Simultaneous radiation pressure induced heating and cooling of an opto-mechanical resonator,” Applied Physics Letters 100, 111115 (2012). #photonics #mems
  • [C5] Siddharth Tallur, Suresh Sridaran and Sunil A. Bhave, “A silicon nitride optomechanical oscillator with zero flicker noise,” 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2012), Paris, France, pp. 19-22 (2012). #photonics #mems

  2011

  • [J3] Siddharth Tallur, Suresh Sridaran and Sunil A. Bhave, “A monolithic radiation-pressure driven, low phase noise silicon nitride opto-mechanical oscillator,” Optics Express 19, pp. 24522-24529 (2011). #photonics #mems
  • [C4] Siddharth Tallur, Tiffany J. Cheng, Suresh Sridaran and Sunil A. Bhave, “Motional impedance analysis: bridging the ‘gap’ in dielectric transduction,” IEEE International Frequency Control Symposium, San Francisco, California, May 1-5, 2011, pp. 135-138 (2011). #mems
  • [J2] Rajeev Dokania, Xiao Wang, Siddharth Tallur and Alyssa Apsel, “A low power impulse radio design for body-area-networks,” IEEE Transactions on Circuits and Systems-I 58(7), pp.1458-1468 (2011). #cas

  2010

  • [C3] Siddharth Tallur, Suresh Sridaran, Sunil A. Bhave and Tal Carmon, “Phase noise modeling of opto-mechanical oscillators,” IEEE International Frequency Control Symposium, Newport Beach, California, pp. 268-272 (2010). (finalist for student paper competition) #photonics #mems
    
  • [J1] Rajeev Dokania, Xiao Wang, Siddharth Tallur, Carlos Dorta-Quinones and Alyssa Apsel, “An ultra-low-power dual-band UWB impulse radio,” IEEE Transactions on Circuits and Systems-II 57(7), pp. 541-545 (2010). #cas
  • [C2] Rajeev Dokania, Xiao Wang, Carlos Dorta-Quinones, Wacek Godycki, Siddharth Tallur and Alyssa Apsel, “A 6μW, 100kbps, 3-5GHz, UWB impulse radio transmitter,” International Symposium on Low Power Electronics and Design (ISLPED), Austin, TX, pp. 91-94 (2010). (finalist for student paper competition and winner of design contest) #cas
    
  • [C1] Rajeev Dokania, Xiao Wang, SiddharthTallur and Alyssa Apsel, “A 19μW, 100kbps impulse radio transceiver for body-area-networks,” Proceedings of the International Symposium on Circuits and Systems (ISCAS), Paris, France, pp. 325-328 (2010). #cas