• Inverter topologies for VAr compensation.
• Power electronic interfaces for non-conventional energy sources.
• Medium and High frequency transformers.

• Permanent magnet machines for wind power generation.
• Switched reluctance machines for electric vehicle application.
• Condition monitoring of electrical machines.
• Magnetic gears and magnetic gear integrated switched reluctance motors.
• Electrically excited brushless synchronous motors for electric vehicles.
• Synchronous reluctance motors for irrigation, electric vehicle, ceiling fan applications.
• Ultra-high speed induction motor for spindle applications.
• Read more

• EE101 Introduction to Electrical and Electronic Circuits
• EE111 Introduction to Electrical systems
• EE218 Electrical Machines
• EE222 Electrical Machines and Power Electronics
• EE653 Power Electronics-I
• EE656 Electrical Machine Analysis & Control
• EE657 Electric Drives
• EE660 Application of Power Electronics to Power Systems
• EE791 Power Electronic Converters for Renewable Energy
• EE6108 Advanced Electrical Machine Design

• Ph.D, Indian Institute of Technology Bombay, India, 1993
• M.Tech, Indian Institute of Technology Kharagpur, India, 1989
• B.Tech, National Institute of Technology Karnataka, Surathakal, India, 1984

• Chairman, Department of Electrical Engineering, IIT Bombay (January’ 15 – January’ 21) Read more
• Chairman, Department of Electrical Engineering, IIT Dharwad (IIT Bombay as Mentor Institute) (Jul’16 - Jan’21)
• Chairman, School of Electrical Sciences, IIT Goa (IIT Bombay as Mentor Institute) (Jul’16 - Jul’19)
• Institute Chair Professor, Department of Electrical Engineering, IIT Bombay (July’ 14 – June' 17)
• Professor, Department of Electrical Engineering, IIT Bombay (April’ 07 – date)
• Associate Professor, Department of Electrical Engineering, IIT Bombay (February’ 01 – March’ 07)
• Assistant Professor, Department of Electrical Engineering, IIT Bombay (December’ 97 – January’ 01)
• Assistant Professor, Department of Electrical Engineering, IIT Kanpur (November’ 93 - November’ 97)

• Co-founder and Mentor of Startup AproposDrive Technologies Pvt. Ltd. (2016 – date) Read more
• Visiting Researcher, Medium Voltage Drives, ABB, Zurich (August’ 11 – November’ 11)
• Visiting Associate Professor, Department of Electrical Engineering, ETH, Zurich (May’ 08 – July’ 08)
• Visiting Associate Professor, Department of Electrical Engineering, Esigelec, France (November’ 07)
• Design Engineer, M/s. Development Consultants, Bombay. Involved in the design of a 35 MW captive power plant for Gujarat Narmada Fertilizer Company and (2 x 235) MW nuclear power plant at Narora (UP) and Kakrapar (Gujarat) (September’ 84 – July’ 87)
• Delivered a plenary talk entitled “Possible Way Forward for EV Motors in Indian Scenario: Less-rare-earth Solutions” at ECCE Asia 2025 in Bangalore, India.
• Delivered a tutorial talk titled “High-performance Electrical Machine Solutions with Less Rare-earth Materials” at 2025 Energy Conversion Congress and Expo. in Philadelphia, PA, USA.
• Delivered a keynote talk entitled “Brushless Field-excitation Systems for Motors in Electric Vehicles” at PESGRE 2025 in IIT Dharwad, India.

• Fellow, Indian National Academy of Engineering (INAE), India
• Fellow, IEEE, USA
• Associate Editor of the IEEE Transactions on Power Electronics
• Member of the IEEE Richard Harold Kaufmann Award Committee from 2024.

• The Ph.D. thesis, “Motor Integrated Electrodynamic Wheel for Magnetic Levitation Applications” by Dr. A. Kushwaha under my supervision won the ISOI Best Thesis Award from Instrument Society of India (ISOI) in 2025.
• Won the Best Paper Award in the 11th IEEE International conference on power electronics drives and energy systems (PEDES 2024) at NIT Karnataka (2024), “Novel line-start rib-less PM assisted synchronous reluctance motor for submersible pumps”.
• Won the Best Paper Award in the 2024 IEEE International Communications Energy Conference (INTELEC 2024) at Bengaluru, India, “A 300 VA Low-Cost Efficient Standalone Photovoltaic System for Rural Applications”.
• The Ph.D. thesis, “Motor Integrated Electrodynamic Wheel for Magnetic Levitation Applications” by Dr. A. Kushwaha under my supervision won the Naik and Rastogi Excellence in Ph.D. Thesis Award from IIT Bombay in 2023.
• Received the Best Teacher Award from IIT Bombay in 2021 & 2003.
• Received Distinguished Alumnus Award in 2019 from National Institute of Technology Karnataka, India.
• The Ph.D. thesis “Modular Converter Topologies with reduced transformer rating and capacitor sizing for high power regenerative drives” by Dr. Shambhu Sau under my supervision won the INAE Innovative Student Projects Award from Indian National Academy of Engineering (INAE) in 2018.
• The Ph.D. thesis, “Non-Isolated and Paralleled Current-Fed Inverter Topologies for Grid-Tied Photovoltaic Systems” by Dr. C. Anandbabu under my supervision won the Best Thesis Award from IIT Bombay in 2017.
• 2016 IET Premium (Best Paper) Award for the paper titled, “Design Procedure of Segmented Rotor Switched Reluctance Motor for Direct Drive Application,” IET Electric Power Application, vol. 8, no. 3, pp. 77-88, March 2014 by R. Vandana and B. G. Fernandes
• The Ph.D. thesis, “Investigations into the Performance of Switched Reluctance Motor for Commercial Applications” by Dr. S. P. Nikam under my supervision won the Best Thesis Award from IIT Bombay in 2015.
• The Ph.D. thesis, “Current-fed Converter Topologies for Interconnecting Solar Photovoltaic, AC and DC Grids” by Dr. V. Y. Vekhande under my supervision won the POSOCO Power System Award in 2015.
• The Ph.D. thesis, “Interface Circuits and Controllers for Effective Utilization of Solar Photovoltaics” by Dr. S. Anand under my supervision won the Best Thesis Award in 2013 from IIT Bombay.
• Won the Best Paper Award in the Third National Power Electronics Conference conference at I.I.Sc. Bangalore (NPEC 2007), “Design and Analysis of full pitch winding and concentrated stator pole winding three-phase flux reversal machine for low speed application”.
• Graded as one of the Best Instructors thrice by the students of IIT Kanpur in 1995, '96 & '97

1. Shovan Dey, Annoy Kumar Das, and Baylon G. Fernandes, “Brushless Excitation System with Bipolar Field Current Control for Synchronous Machines,” Indian Patent no.: 586062, 2025.
2. M. J. Vishal and B. G. Fernandes, “Permanent magnet assisted synchronous reluctance motor with fluid-shaped flux barriers and rectangular permanent magnets on either sides of the barrier,” Indian Patent Application No. 202421078426.
3. Shovan Dey and B. G. Fernandes, “Hybrid-Excited Synchronous Machine with Current-Excited Asymmetric Rotor Pole”, Indian Patent Application Number: 202421070451.
4. Vishal M. J. and B. G. Fernandes, Rib-less Line-Start Permanent Magnet assisted Synchronus Reluctance Motor, Indian Patent Application No. 202421047759.
5. Shovan Dey and B. G. Fernandes, A Hybrid Excited Synchronous Machine, Indian Patent No.: 561016.
6. Shovan Dey, B. G. Fernandes, A Novel Segmented-rotor Synchronous Machine with Dual-field Configuration having Inherent Decoupling Capability, Indian Patent Application no. 202421038355.
7. Shovan Dey and B. G. Fernandes, Permanent Magnet Alternating Current Machine, Indian Patent application no. 202421007567.
8. Saptarshi Dey, B. G. Fernandes, and Kishore Chatterjee, Magnetic Gear Integrated Segmented Rotor SRM with Reduced or No Rare-earth Material, Indian Patent No.: 569127.
9. Annoy Kumar Das, and B. G. Fernandes, Integrated Magnetic Design Methodology for Achieving Load-current Dependent Variable Leakage Inductance in a Medium/High-frequency Transformer, Indian patent no. 557231.
10. Saptarshi Dey, B. G. Fernandes, and Kishore Chatterjee, A Magnetic Gear Integrated Switched Reluctance Motor, Indian patent no. 550125.
11. Saptarshi Dey, B. G. Fernandes, and Kishore Chatterjee, Switched Reluctance Motor Having Integrated Magnetic Gear, Indian patent no. 496175.
12. Jitendra Kumar and B. G. Fernandes, A Stable IPM-SyRM topology, Indian Patent App. No. 202321068451.
13. A. Kushwaha, B. G. Fernandes, N. Endla, M. Manohar, Magnetic Levitation System for Increasing Magnetic Field Intensity Therein, Indian Patent No. 403273.
14. Swati Savaliya and B. G. Fernandes, “Breaker circuit in a Microgrid system and a method for protecting power supply,” Indian Patent No. 409998.
15. Nagamalleswararao Kamarajugadda, Baylon Godfrey Fernandes, Kishore Chatterjee, Multifunctional and integrated on-board electric vehicle charger, Indian Patent Appl. No. 553268.
16. Anees Vettuparambil, B. G. Fernandes and K. Chatterjee “Multiport converters to interface solar PV arrays and battery storage system with dc electric grid,” Indian patent no.: 469375.
17. Neethu S. and B. G. Fernandes, “A T-spoke type rotor and a rotary electric machine containing the same”, Indian patent no. 486646.
18. Shambhu Sau, and B. G. Fernandes, “Modular Multilevel Converter(MMC)”, Indian Patent no. 421226.
19. Shambhu Sau, Saurabh P Nikam, and B. G. Fernandes, “Regenerative Cascaded Multicell Converter(CMC)”, Indian Patent no. 501987.
20. S. Sashidhar, Silba Mathew and B. G. Fernandes, “Motor System and Winding for an Electric Motor”, Indian Patent No. 356976.
21. S. Sashidhar and B. G. Fernandes, “Semi-Modular Submersible Brushless DC Motor”, Indian Patent no. 549887.
22. Swati Savaliya and B. G. Fernandes, “Breaker circuit in a Microgrid system and a method for protecting power supply,” Indian Patent Appl. No. 409998.
23. Swati Savaliya, B. G. Fernandes and Sumeet Singh, “Bi-directional Z-source circuit breaker topologies with re-closing and re-breaking capabilities,” Indian Patent no. 524959.
24. S. Neethu, S. P. Nikam, B. G. Fernandes, A. K. Wankhede and Saumitra Pal, “Wave Type Winding for Printed Circuit Board based Stator of an Axial Flux Permanent Magnet Motor,” Indian Patent No. 498474.
25. B. G. Fernandes, Akshatha Shetty, Arun C Nair, “Unified AC-DC microgrid architecture for distribution of AC and DC power on same line”, Indian Patent No. 474593.
26. B. G. Fernandes, Akshatha Shetty, Aarathi Ramesh, ““Method and apparatus for integrating low voltage PV power to three phase AC power”, Indian Patent No. 470974.
27. S. P. Nikam and B. G. Fernandes, “Switched reluctance drive for ceiling fan,” Indian Patent no. 331672
28. R. Vandana, S. Nikam and B. G. Fernandes, “A segmented switched reluctance motor as hub drive for an electric vehicle,” Indian Patent No.: 331582.
29. S. Anand and B. G. Fernandes, “Energy Conversion System,” Indian Patent Appl. No. 2912/MUM/2011
30. S. Anand and B. G. Fernandes, “Wall mounted speed regulator for a BLDC motor driven ceiling fan,” Indian Patent No.: 536090.
31. N. Vattikuti, R. Vandana and B. G. Fernandes, “A high power density switched reluctance motor,” Indian Patent Appl. No. 197/MUM/2009
32. P. Mahajan and B. G. Fernandes, “Inverted switched reluctance motor and controller for electric two-wheeler,” India Patent IN241923, Issued on February 26, 2007

1. Principal investigator of 7 projects, for ₹ 77 Million (approx. US $ 8,00,000) focused on development of different electric motor technologies for electric vehicle funded by Anusandhan National Research Foundation (ANRF) under Mission for Advancement in High-impact Areas (MAHA) : EV-Mission in 2025.
   Project titles:
   1. Condition monitoring of Electric machines for EV and High Power Applications
   2. Switched Reluctance Motor Based Flywheel Energy Storage System
   3. Permanent Magnet Assisted Synchronous Reluctance Motor for Electric 3-Wheeler
   4. Development of 48 V Switched Reluctance Motor Drive for Electric 2-wheeler
   5. Electrically-excited Brushless Synchronous Motor (EEBSM) for four-wheeler
   6. Hybrid-excited Brushless Synchronous Motor (HEBSM) for four-wheeler
   7. Design and Development of 6 kW Segmented Rotor Switched Reluctance Motor and Controller for Electric 2-wheeler.
2. One of the Principal Investigators of a grant funded by Ministry of New and Renewable Energy (MNRE), Government of India for US $ 5 million entitled, “National Centre for Photovoltaic Research and Education (NCPRE) - Phase-III,” (2023-2027) Read more
   The National Centre for Photovoltaic Research and Education (NCPRE) was established by the Ministry of New and Renewable Energy (MNRE) at IIT Bombay in 2010 when the National Solar Mission was launched. The research and development activities under NCPRE encompasses areas related to solar photovoltaic (PV), and education and training, which involves 34 faculty members from 9 Departments at IITB and about 170 post-graduate students and research assistants. The following activities are being planned in the power integration group of NCPRE (Phase -III), such as SiC-based compact and efficient inverter for direct medium voltage (MV) ac grid integration, estimation and improvement of solar inverter reliability, and optimal capacity and technology mix of grid scale storage for achieving high penetration of renewables. NCPRE has international collaborative projects with universities, R&D centers and extensive industrial collaborations. The vision of NCPRE is to contribute to India’s solar energy mission through research, development, industry interaction and education, and to establish itself a leading international academic photovoltaics centre.
3. Principal investigator of a grant funded by Protescap for US $ 287,692 towards research, development, education, teaching facilities, and outreach in the field of wide-bandgap (WBG) semiconductor power switching devices technology for various applications, (2018-2022)
   The objective of the project is to conduct research and development in the field of wide-bandgap (WBG) semiconductor power-switching devices technology for various applications as the said technology has a wide range of applications spanning across medical/industrial/consumer electronics, renewable energy and electric/hybrid vehicles. Thereby, aiming to improve energy security and substantially reducing the environment impact of power electronics. The major activities of the project were the Design and growth of II-N semiconductor heterostructures; Design and Fabrication of normally-off-high power switching GaN-HEMT devices; Power electronics circuit/system design and assembly integrating the GaN-based HEMT; Design, Analysis and Study of high speed motors for spindle applications, Development of very high speed laminated rotor induction motor and its structural analysis for strength & reliability, selection of bearing type, Selection of suitable materials, Critical speed and rotor dynamic analysis, Fabrication of high speed motor prototype, Development of control strategies and fabrication of the controller, testing of developed high speed motor prototype; Study of PM and PM free machine (axial & radial) using soft magnetic composite materials, Design and fabrication of high speed PM topology machine & its controller, Fabrication of Axial flux PM machine, Development of control strategies for PM and PM free machines.
4. Principal investigator of grant funded by Department of Science and Technology for US $ 315,428 entitled “AlGaN/GaN Power Transistor Based Platform Technology and Modules for Smart Grid Applications”, (2018-2022)
   Future Smart Electric Grid, is meant to enhance efficiency, ensure reliability, and enable integration of non-conventional and renewable energy sources, while meeting the traditional demand from electric grid, along with a reduction in the overall carbon footage. While the various segments of the smart grids e.g. generation, transmission, distribution and end-use utilization demand various levels of improvements, the solid state power electronic circuits provide a uniform platform for almost all strands particularly for distribution and end-use. Though Si based technology is ubiquitous for most of the traditional applications, wide band-gap technology is the need of the hour for smart-grids where efficiency is of utmost importance. SiC and GaN based devices are potential choices and both are gaining increasing acceptance on the device and technology community. However, GaN is going to outperform any other material because of its superior material properties. Hence, we have focused on developing GaN enhancement high electron mobility transistor based platform device and technology meeting the needs for electric smart-grid particularly in the context of distribution and end-use utilization. The work is largely divided into two segments i) development of enhancement mode GaN HEMT based power transistor platform technology which will lead to the realization of an array of devices to meet the various needs for smart-grids and ii) development of prototype modules for DC-DC converter and bi-directional solid-state circuit breaker. The platform E-mode GaN HEMT technology will allow an array of devices of various specifications. Some typical key specifications include 100-600 V voltage, 5-30 A current, 100 MHz switching frequency fast fall and rise times, zero reverse recovery loss.
5. Principal investigator of a grant funded by Ministry of Electronics and Information Technology for ₹ 84.2 Crores entitled “National Centre of Excellence in Technology for Internal Security”, in 2018 Read more
6. Co-PI of grant funded by NTPC for US $ 16,428 entitled “Performance, Reliability and Degradation Evaluation for a MW Scale Solar PV Plant”, (2017-2022)
   The objectives of the project were to prepare guidelines for quality-related checks on PV modules for NTPC project to be commissioned; to study the reduction of power output at an existing NTPC power plant, as a part of the normal degradation of PV modules, with reference to the different technology modules available, solar insolation, and climatic zone in which the plant is located; to Benchmark module and power plant performance against factory data sheets and plant configuration; to develop a protocol for periodic assessment and preliminary work on prediction of long-term module performance and degradation.
7. Principal investigator of grant funded by Department of Science and Technology for US $ 771,000 entitled “India-UK Centre for education and research in clean energy”, (2017-2022)Read more
   India-UK Centre for Education and Research in Clean Energy (IUCERCE) is a consortium project funded by the Project sponsored by Department of Science & Technology (DST), Govt of India. The budget overlay of the project is ₹ 21.83 Crore and the project started in July 2021. The consortium involves several faculty members from IIT Bombay (9), IIT Kanpur (2), IIT Hyderabad (2), Tezpur University (1) and Scientists from CDAC Thiruvananthapuram (3). IUCERCE aims to address the issues related to microgrids to meet the rural and urban electrical demands by improving the quality and reliability of the energy supply. This broad aim will be achieved through implementation of renewable systems based microgrids in different regions in India representing different climatic conditions as well as different microgrid application scenarios. The microgrids will be installed at four different climatic conditions including Lakshadweep, Mount Abu, Rajasthan, North Eastern Hill University, Shillong and IIT Bombay. The main deliverables include state of the art smart-inverter which operates in grid connected and islanded mode, research outcome involving identifying novel storage materials (including ultracapacitors), building energy management system algorithm considering inclusion of solar PV and optimization tool. This consortium works in synchronization with UK partners through Joint UK India Clean Energy Centre (JUICE) on the deliverables stated.
8. Principal investigator of a grant funded by Department of Science and Technology for ₹ 5.45 Crores entitled “Indo-UK Centre for Educational Research in Clean Energy”, in 2017 Read more
9. Co-PI of a grant funded by an India-UK Collaborative Research Initiative in Solar Energy for US $ 1,000,000 entitled, “Stability and Performance of Photovoltaics,”.
   🏆 Indo-UK excellence award for collaborations in higher education in the year 2016.
10. One of the Principal Investigators of a grant funded by Ministry of New and Renewable Energy (MNRE), Government of India for US $ 9.3 million entitled, “National Centre for Photovoltaic Research and Education (NCPRE) - Phase-II,” (2016-2022)Read more
    The National Centre for Photovoltaic Research and Education (NCPRE) was established by the Ministry of New and Renewable Energy (MNRE) at IIT Bombay in 2010 when the National Solar Mission was launched. NCPRE is mentioned as their ‘flagship project in solar PV’ in MNRE’s Annual Reports of 2018-19 and 2019-20. NCPRE was created with a highly multidisciplinary vision which involves 29 faculty members from 8 Departments at IITB and about 170 post-graduate students and research assistants contribute to various activities of NCPRE. NCPRE has emerged as a leading centre with a broad range of expertise ranging from industrial c-Silicon solar cells, perovskite, energy storage technologies, module reliability and power electronics. Excellent research facilities in terms of 12 different laboratories with total area of about 1200 meter square have been set up at NCPRE. During 2010 to 2021, NCPRE has published 260 journal papers, 344 conference presentations and has created 26 patents and 2 Start-Up companies. NCPRE has International collaborative projects with universities, R&D centers and extensive collaborations with Industry. The vision of NCPRE is to contribute to India’s solar energy mission through research, development, industry interaction and education, and to establish itself a leading international academic photovoltaics centre. We received the ‘Award for Outstanding performance’ for contributions towards technology development and demonstration in photovoltaics by NCPRE, IIT Bombay in the year 2015.
11. Lead principal investigator of a grant funded by Ministry of Electronics and Information Technology (MeitY) for US $ 11.42 million entitled “National Center of Excellence in Technology for Internal Security”, (2015-2022) Read more
    The National Center of Excellence in Technology for Internal Security (NCETIS), IIT Bombay was established in the year 2015. It is a single-point interface in mobilizing research and the manufacturing industry to address technology gaps encountered in the strategic sector of internal security. The Center has undertaken 20 different projects that represent 11 different research areas on which the Center is focussing upon. The core team of the Center comprises 16 faculty from various departments of IIT Bombay. Over the years, more than 83 manpower have been trained in various areas of research. Apart from the main activity of developing technologies significant to the internal security sector, the Center also provides consultation services to security forces regarding their technology choices. Throughout the years, the Center has been working continuously to increase and improve its visibility. Conducting webinars, workshops and participating in defense exhibitions are some of the outreach programs the centre has undertaken since its commencement.
12. Principal investigator of grant funded by Department of Science and Technology for US $ 100,000 entitled “Design and development of high performance multi-functional modular multilevel converter topologies for renewable energy integration in smart dc grid (M3C)”, (2014-2019)
    The objectives of this project were to develop new Power Electronic Architecture(s) based on Multi-functional Modular Multilevel Converter (M3C) for PV power penetration into Smart-grid, Direct power transmission from any specific source to any other specific load using different transmission frequencies in the same network and providing simultaneous functions (maximum power point tracking, individual load sharing and charge equalization, etc.) with better stability on account of the reduced number of the power converters.The principal investigator from Netherlands was Professor Jan Abraham Ferreira, from the Department of Electrical Sustainable Energy, Delft University of Technology.
13. PI of grant funded by BARC for US $ 70,000 entitled “Study, analysis and development of technologies for high speed, low power synchronous motors and their sensor less controllers”, (2014-2017).
14. - Co-PI of a grant funded by an India-UK Collaborative Research Initiative in Solar Energy for ₹ 700 Lakhs (US$ 1,000,000) entitled, “Stability and Performance of Photovoltaics,” in 2010
15. One of the PIs of a grant funded by Federal government for ₹ 470 Million (US $ 10,000,000) entitled, “National Centre for Photovoltaic Research and Education (NCPRE),” in 2010.
16. Co-PI of a grant funded by Maharashtra State Electricity Distribution Company Ltd. for ₹ 20 Lakhs (US $ 50,000) entitled, “Preparation of Design Specification of Low Tension Load Management System,” in 2007
17. Principal investigator of a grant funded by ICICI Onesource for ₹ 0.9 Lakhs (US $ 2000) entitled, “Investigating the Reasons for High Ground Current and Failure of Electronic Equipment,” in 2006
18. Principal investigator of a grant funded by Ministry of Information Technology for ₹ 72 Lakhs (US $ 1,50,000) entitled, “National Mission on Power Electronics Technology – Infrastructure Development at IIT Bombay,” in 2006
19. Principal investigator of a grant funded by Ministry of Human Resources (MHRD) for ₹ 10 Lakhs (US $ 22,000) entitled, “Electric Drives Laboratory for Alternative Energy System,” in 2003
20. Principal investigator of a grant funded by Ministry of Human Resources (MHRD) for ₹ 23 Lakhs (US $ 50,000) entitled, “Modernization of Electric Machines Laboratory,” in 2002
21. Principal investigator of a grant funded by M/s. Bharat Bijlee, Mumbai for ₹ 0.85 Lakhs (US $ 2000) entitled, “Development of DSP based DC Drive,” in 2000
22. Principal investigator of a grant funded by Central Power Research Institute for ₹. 13 Lakhs (US $ 28,000) entitled, “Analysis and Design of Line start PMSM for Irrigation Pumps,” in 2000
23. Principal investigator of a grant funded by Board of Research in Nuclear Sciences (BRNS) for ₹ 14 Lakhs (US$30,000) entitled, “Development of High Power, High Frequency Power Supply,” in 2000
24. Co-PI of a grant funded by M/s. Triangle Simulators, Mumbai for ₹ 0.4 Lakhs (US$1000) entitled, “Generator Modeling for Training Simulator,” in 1999
25. Principal investigator of a grant funded by Ministry of Human Resources (MHRD) for ₹ 9 Lakhs (US $ 20,000) entitled, “Development of Power Factor Controller and Harmonic Suppressor System,” in 1999
26. Co-PI of a grant funded by Planning Commission for ₹ 108 Lakhs (US $ 2,00,000) entitled, “Development of FHP Permanent Magnet Synchronous Motor (A Mission Mode Project),” in 1998

1. Ajith. K. A, 2026 - Elimination of Power Unbalance in Modular Multilevel Converters for Large-Scale Photovoltaic Integration
2. Saptarshi Dey, 2026 - Novel Philosophies for Integrating Magnetic Gear with Switched Reluctance Motor
3. Jitendra Kumar, 2026 - Investigations of Magnetization Orientations in PM Synchronous Motors for Optimized Performance across Entire Operating Regions
4. Srinivas Baka, 2024 - Investigations on Line-start Two-pole Ferrite Assisted Synchronous Reluctance Motor
5. Annoy Kumar Das, 2024 - Lumped Parameter Based Modeling and Design Optimization of Two-winding Medium-frequency Transformer
6. Arun C Nair, 2023 - Power Converters for Fast Charging Stations and Drive-Trains of Electric Vehicles
7. Amar A Kushwaha, 2023 – Motor Integrated Electrodynamic Wheel for Magnetic Levitation Applications
   🏆 ISOI Best Thesis Award
   🏆 Naik and Rastogi Excellence in Ph.D. Thesis Award
8. R.M. Ram Kumar, 2022 – High-Speed Synchronous Reluctance and Permanent Magnet Assisted Synchronous Reluctance Machines for Heavy Duty Commercial Vehicles
9. Akshatha Shetty, 2022 – Battery/PV Integrated Systems Employing Unifed Ac - Dc
10. Anees Vettuparambil, 2021 – A family of multiport converters interfacing solar PV modules with DC microgrid
11. Huma Khan, 2020 – Integrated Controller for Multi-functional Smart PV Systems connected to LV Distribution Grid
12. Swatiben G. Savaliya, 2020 - Circuit breaker topologies for low voltage DC microgrid
13. Neethu S., 2020 - Design and Performance investigations of laminated-core-stator and PCB-stator based axial flux permanent magnet motors for high-speed low-power applications
14. Onkar V. Kulkarni, 2018 - New Control Methods for Static Distributed Generators in AC Supply Systems
15. Shambhu Sau, 2018 - Modular Converter Topologies with reduced transformer rating and capacitor sizing for high power regenerative drives
    🏆 INAE Innovative Student Projects Award
16. Indrajit Sarkar, 2018 - Hybrid Symmetric Cascaded H-bridge Multi-level Converters for Medium-voltage High-power Industrial Applications
17. V. V. S. P. Kumar, 2017 - Fault-Tolerant and Active Power Decoupling Topologies for Single-Phase Grid-Connected Solar Photovoltaic Systems (M.Tech+Ph.D.)
18. S. Sashidhar, 2017 - Investigations on Ferrite PM BLDC Motors for a Deep Bore-Well Submersible Pump
19. C. Anandbabu, 2017 - Non-Isolated and Paralleled Current-Fed Inverter Topologies for Grid-Tied Photovoltaic Systems
    🏆 Best Thesis Award
20. Rajesh Farswan, 2016 - Efficient On-Grid And Off-Grid Solar Photovoltaic Inverter Systems With High Reliability For Rooftop Application
21. Bhukya Mangu, 2016 - Multi-Input Converters for Effective Utilization of Integrated PV-Wind-Battery based Systems
22. B. R. Pimple, 2016 - Control of Doubly Fed Induction Generator for Wind Power Generation
23. S. P. Nikam, 2015 - Investigations into the Performance of Switched Reluctance Motor for Commercial Applications
    🏆 Best Thesis Award
24. V. Y. Vekhande, 2015 - Current-fed Converter Topologies for Interconnecting Solar Photovoltaic, AC and DC Grids
    🏆 POSOCO Power System Award
25. R. Madhavan, 2013 - Axial Flux Segmented SRM for Electric Vehicle Application
26. N. N. V. S. Babu, 2013 - Cascaded Two Level Inverter based Multilevel STATCOM
27. R. Vandana, 2013 - Segmented Rotor Switched Reluctance Motor for Electric Vehicle Applications
28. S. Anand, 2013 - Interface Circuits and Controllers for Effective Utilization of Solar Photovoltaics
    🏆 Best Thesis Award
29. D. S. More, 2010 Design and Analysis of Three Phase Flux Reversal Machine for Roof Top Wind Power Generation
30. D. V. Ghodke, 2008 - High Power Factor AC to DC Conversion Systems
31. G. V. Jayaramaiah, 2008 - Voltage Control Strategies for Stand-alone Self-excited Induction Generator
32. Arbind Kumar, 2008 - Simplified Direct Torque Control Strategies for Medium and High Power Three Phase Induction Motor Drive
33. Jagjitpati Shukla, 2007 - Three phase AC-DC and DC-AC Soft Switching Converters
34. A. B. Raju, 2005 - Power Electronic Interface for Grid Connected Variable Speed Wind Energy Conversion Systems
35. B. N. Chaudhari, 2001 - Design and Analysis of Line Start Permanent Magnet Synchronous Motor for Irrigation Pumps
36. Jamal Jafar, 1998 - Quasi-Resonant PWM Inverter for Induction Motor Drive
37. Kishore Chatterjee (currently Professor at IIT Bombay), 1997 - Static Var Compensator and Harmonic Suppressor System

1. Mitul A. Wankhede, 2025 - Investigations on High Frequency Rotary Transformers and associated Resonant Converters for Brushless Operation of Electrically-/Hybrid-excited Synchronous Machines
2. Pushpraj Chandrakar, 2024 - Control of permanent magnet assisted synchronous reluctance motor for traction application
3. Karthik M, 2022 - Design of Low Cost 500VA Standalone Solar Inverter
4. Mrunmay S. Vaidya, 2021 – Comparative Study of DC/AC Bidirectional converters for Battery charging in Integrated Starter Generator Application
5. Minnatkumar Patel, 2021 – Design and optimization of DC induction cook stove
6. Mayank Manohar, 2021 – FEM-based Design and Analysis of a 12-slot/10-pole PMSM with Asymmetric Magnetic Field Distribution in the Airgap
7. Parth Patil, 2021 – Field Weakening and speed control of PMSM
8. Samiksha Baid, 2021 – Sensorless rotor position estimation of PMSM
9. Rishab Anand, 2019 - Simplified Control Strategy for Inhomogeneous Series-Connected Battery Strings (INAE Innovative Student Projects Award)
10. Rupali Vinayak, 2019 - GaN-Based Interleaved Isolated Boost Converter
11. Vishal M. J., 2018 - Quad-Active-Bridge DC-DC Converter based On-board Power-Electronic Interface for Electric-Vehicle
12. Harikrishna Metta, 2018 - Three single phase VSC based Interface for Micro-Grid applications
13. Subin John Chacko, 2017 - LVRT Operation for PV Systems connected to LV Grid During Balanced and Unbalanced Faults
14. Aarathi Ramesh, 2017 - LV PV Integration to 3-phase PWM Rectifier using Unified AC-DC Approach
15. Saikat Karmakar, 2017 - Reduction of Capacitor Voltage Ripple for MMC based Variable Speed Drives
16. Chinmay Bhagat, 2016 - Design and Development of BLDC Motor-Controller for DC-Operated Mixer-Grinder
17. Abhijit Datta, 2016 - Design and Development of a 2.5 kVA Two-stage Transformerless Grid-tied Photovoltaic System using SiC Devices with Emergency Battery-backup (INAE Innovative Student Projects Award)
18. V. S. Abhijit, 2016 - Multi-Frequency Microgrid
19. Girish Kamble, 2016 - Development of Single Phase Efficient Low-Cost 1kVA Grid Tied Inverter
20. Ashok Kumar, 2015 - Fault Tolerant Converters for Grid Connected PV Applications
21. Vikas Kuraria, 2015 - Control of Ferrite Based Permanent Magnet Motor for Electric-Assist Campus Bicycle
22. Chakridhar Reddy, 2015 - Interleaved SVM Strategy for a PV - Based Grid Connected Multilevel CSI with Unequal DC-Currents
23. Vaibhav Gholase, 2015 - Design and Development of BLDC Motor for DC Operated Mixer-Grinder
24. Nimish Kothari, 2015 - Islanding Detection of Single-Phase Grid-Connected Inverter (POSOCO Power System Award)
25. Suhas B. Bhat, 2014 - Design of An Electric-Assist Bicycle
26. Sameer Jain, 2014 - Control of Switched Reluctance Motor for Intra-Campus Three Wheeler
27. Rohit Suryadevara, 2014 - Improved Direct Instantaneous Torque Control of Switched Reluctance Motor
28. V. K. Kanakesh, 2014 - Control Of Bidirectional Current Fed Converter Under Unbalanced Grid Voltage
29. Walhekar Tanay, 2013 - Design of DC Conduction Pump for Fast Breeder Reactors
30. Rohith, 2013 - Control of Bidirectional Current-fed Converter for Integration of DC Micro-grid with AC grid under Generalized Grid Unbalance Conditions
31. R. Viju Nair, 2013 - Design and Development of Grid Connected High Performance Solar Inverter
32. R. Ramu Nair, 2012 - Design and Development of Reliable and Efficient Grid Connected Solar Inverter
33. Shailendra Singh, 2011 - Design and Fabrication of Switched Reluctance Motor for Two-wheeler Electric Vehicle
34. Saikrishna Kashyap, 2011 - Design and Development of Reliable and Efficient Inverter for Grid Connected PV Applications
35. S. Kanukollu, 2010 - Direct Torque Control of Switched Reluctance Motor
36. D. A. Rao, 2010 - Cascaded Two Level Inverter based STATCOM
37. R. Jena, 2010 - Analysis, sizing, fabrication and control of five phase switched reluctance motor for in-wheel electric vehicle application
38. M. Shaik, 2009 - Z-source inverter
39. S. S. Deshpande, 2009 - Performance evaluation of circular slotted segmented switched reluctance motor and conventional switched reluctance motor
40. P. K. Patel, 2009 - Color control using RGB LEDs
41. Suresh Krishna, 2008 - Matrix converter for doubly fed induction generator
42. N. Vattikuti, 2008 - Theoretical Investigation of Design and Control of Outer Rotor Segmented Switched Reluctance Motor
43. Hari Kalluru, 2008 - Design and Fabrication of Flux Reversal Machine for Rooftop Wind Power Generation
44. R. Vandana, 2008 - Experimental Investigation of Design and Control of Outer Rotor Segmented Switched Reluctance Motor
45. A. M. Upadhyay, 2008 - Solar-powered high brightness L.E.D. Lantern
46. H. S. Johar, 2008 - Fault tolerance analysis of brushless DC motor drive
47. S. Nath, 2008 - Current direction based two step commutation control of matrix converter
48. V. Y. Singh, 2007 - Design and implementation of matrix converter fed induction drive system
49. B. M. Joshi, 2007 - High power vector controlled induction motor drive with inverter output LC Filter
50. A. M. Chole, 2007 - DC-DC power conversion using smart piezoelectric transformers
51. N. V. Edlabadkar, 2007 - Control of axial flux brushless DC motor using TMS320LF2407
52. M. K. Vyas, 2007 - Control of switched reluctance motor with sensor-less detection of rotor position
53. A. Mitra, 2006 - Sensor-less control of axial flux permanent magnet machine with integrated flywheel for electric hybrid vehicle
54. D. K. Dwivedi, 2006 - Direct torque control of induction motor
55. P. Verma, 2006 - Direct torque control of interior permanent magnet synchronous motors
56. U. Gupta, 2006 - Design and development of low speed high torque axial flux permanent magnet machine
57. D. P. Mahajan, 2006 - Design and control of inverted switched reluctance motor for automotive Applications
58. N. Patel, 2005 - Power electronics interface for wind generators
59. R. K. Vepakomma, 2005 - Design and implementation of low voltage high current power supplies
60. A. K. Jha, 2005 - Single stage single switch AC/DC converter with high input power factor and tight output voltage regulation
61. Y. A. Sonawane, 2005 - Design of axial flux permanent magnet machine for wind power generation
62. S. C. Bhangale, 2005 - Design of 3-phase line start permanent magnet synchronous motor for fan and pump type loads
63. V. K. C. Arvapalli, 2005 - Design of high speed axial flux permanent magnet machine with integrated flywheel
64. M. D. Bagewadi, 2005 - Novel soft switching schemes for DC-AC and DC-DC converters
65. S. Hirve, 2004 - VAR compensation and elimination of harmonics in three phase four wire system based on resistance emulation technique
66. S. K. Mishra, 2004 - Single stage single switch AC to DC converter with high input power factor and tight output voltage regulation
67. V. Ravikanth, 2004 - Design and development of 10kW three phase IGBT inverter for grid connection
68. S. Vamsidhar, 2004 - Hybrid space vector PWM based sensor-less direct torque controlled induction motor drive
69. K. P. Telikepalli, 2004 - DTC of interior permanent magnet synchronous motor
70. V. R. C. Chall, 2004 - Improvement of efficiency for linear induction pump
71. N. N. Joshi, 2004 - Voltage support using 3 level inverter
72. H. R. Patel, 2003 - Sensor-less rotor field oriented control of induction motor
73. N. B. Suthar, 2003 - Transmission line voltage support using 3 level diode clamped converter
74. S. K. M. Udayar, 2003 - Hybrid space vector pulse width modulation based direct torque controlled induction motor drive
75. B. Srinivas, 2003 - Brushless DC drive for solar powered pumps
76. M. D. Kamil, 2003 - Solar inverter for grid application
77. H. Swami, 2002 - Active magnetic bearing
78. J. Shukla, 2002 - Three-phase unity power factor buck-type rectifier using multi-resonant zero-current switching technique
79. S. Singhvi, 2002 - Design of slot-less brushless permanent magnet DC motor
80. M. Mohan, 2002 - DSP Based Sensor-less Rotor Field Oriented Control of Induction Motor
81. S. L. A. Babu, 2002 - Direct torque control of induction motor drive
82. C. Vangala, 2002 - Simulation of sensor-less control of PMBLDC using fuzzy logic controller
83. V. Kansal, 2001 - Process optimization for MIG/MAG welding: including control system design and development
84. S. V. Patil, 2001 - High frequency inverter for induction heating
85. R. M. Naik, 2001 - Sensor-less fuzzy logic controlled brushless DC motor
86. MD. A. Imam, 2001 - Adding active clamping and soft switching to boost-flyback single-state isolated power-factor-corrected power supplies
87. M. A. Joshi, 2001 - Quasi resonant DC link inverter
88. G. Sattigeri, 2000 - Study of FCAW surfacing
89. M. R. Rathi, 2000 - Static VAR compensator for load compensation
90. Dhiraj Khokhani, 2000 - Operating strategies for self excited induction generator
91. A. R. Sanglikar, 2000 - Direct torque controlled induction motor drive with bi-directional power converter
92. Lt. S.K.Srivastava, 1997 - Study of boost rectifier with active input current waveshaping
93. Rajaneesh, 1997 - Slip power recovery control of a three phase induction motor using PWM IGBT inverter
94. Shyam Sundar, 1996 - Active power filter with constant switching frequency for reactive power and harmonic compensation
95. P Shesh Kumar, 1996 - Speed control of induction motor by slip power control using PWM inverter
96. Tripta Thakur, 1996 - Frequency domain analysis of a LCC type resonant converfter
97. Hemant Agarwal, 1995 - DSP based sensorless field oriented controller for 3 phase induction motor drive
98. Jamal Jafar, 1995 - A GTO based three phase AC-DC PWM converter fed DC motor drive

1. Saptarshi Dey, B. G. Fernandes, K. Chatterjee, ``A Novel Magnetic Gear Integrated Segmented Rotor Switched Reluctance Motor with Improved Performance,'' in IEEE Transactions on Industry Applications (early access), 10.1109/TIA.2026.3703412.
2. A. K. Das and B. G. Fernandes, “Variable Leakage Inductance High-frequency Transformer Having Current-dependent Characteristics Inherent to the Magnetics Design,” in IEEE Transactions on Magnetics (early access), 10.1109/TMAG.2026.3691445.
3. A. K. Das and B. G. Fernandes, “Improved Parallel Plate Capacitor Model Considering Edge Effect Using Correction Factor Derived Based on Regression Analysis,” in IEEE Transactions on Magnetics (early access), 10.1109/TMAG.2026.3690490.
4. Shovan Dey, Annoy Kumar Das, Mitul Wankhede, and Baylon G. Fernandes, “A Novel Brushless Excitation System Capable of Bipolar Field Current Control from Stator of Electrically-/Hybrid-Excited Synchronous Motor”, IEEJ Journal of Industry Applications, 2025.
5. R. M. Ram Kumar, B. G. Fernandes et al., “Tangential-Rib-free SynRel Machine with Improved Torque Density and Manufacturability for an Electric Assist Turbocharger,” in IEEE Transactions on Transportation Electrification.
6. N. Kamarajugadda, B. G. Fernandes and K. Chatterjee, “GaN-Based High Power Density Multifunctional Onboard Charger for Electric Vehicles Eliminating Auxiliary Power Module,” in IEEE Transactions on Industrial Electronics, vol. 72, no. 8, pp. 7920-7931, Aug. 2025.
7. A. K. Das and B. G. Fernandes, “An Analytical Method to Obtain a Wide Frequency Range Equivalent π -Model of a Two-Winding Medium/High-Frequency Transformer,” in IEEE Transactions on Industry Applications, vol. 59, no. 6, pp. 7061-7077, Nov.-Dec. 2023.
8. A. Kushwaha, N. Endla and B. G. Fernandes, Motor Integrated Rotating Permanent Magnets based Electrodynamic Suspension Device: Part I — Concept and Comparison, in IEEE Transactions on Energy Conversion, 2023 vol. 38, no. 3, pp. 1701-1714, Sept. 2023.
9. A. Kushwaha, N. Endla and B. G. Fernandes, Motor Integrated Rotating Permanent Magnets based Electrodynamic Suspension Device: Part II — Investigation of Coupled Topology, in IEEE Transactions on Energy Conversion, 2023 vol. 38, no. 3, pp. 1715-1726, Sept. 2023.
10. A. K. Das and B.G. Fernandes, “Estimation of the Resonance Frequencies Using an Electrostatic Energy Based Capacitance Model of a Two-Winding Medium/High-Frequency Transformer,” in IEEE Transactions on Industry Applications, vol. 58, no. 4, pp. 5301-5316, July-Aug. 2022.
11. S. Baka, S. Sashidhar and B. G. Fernandes, “Influence of Zero-Sequence Circulating Current on the Performance of Star-Delta Winding Line-Start Ferrite Assisted Synchronous Reluctance Motor,” in IEEE Transactions on Energy Conversion, vol. 37, no. 3, pp. 1557-1566, Sept. 2022.
12. Sarkar, Indrajit, and Baylon G. Fernandes. “A Hybrid Symmetric Cascaded H-Bridge Multilevel Converter Topology.” IEEE Journal of Emerging and Selected Topics in Power Electronics (2021).
13. Kushwaha, Amarkumar, and B. G. Fernandes. “Response Surface-Assisted Trust-Region Method for Optimization of Electromagnetic Devices.” IEEE Transactions on Magnetics 57.5 (2021): 1-12.
14. Vettuparambil, Anees, Kishore Chatterjee, and B. G. Fernandes. “Dual Active Bridge Based Multiport Converter with Split DC Links.” IEEE Transactions on Industrial Electronics (2021).
15. Nair, Arun Chandrasekharan, and B. G. Fernandes. “A Solid State Transformer based Fast Charging Station for Various Categories of Electric Vehicles with Batteries of Vastly Different Ratings.” IEEE Transactions on Industrial Electronics (2020).
16. Chitransh, V., Shetty, A., Das, A. K., Ojo, J. O., Veerachary, M., Fernandes, B. G., & Ferreira, J. A., “Evaluation of Multifrequency Power Electronic Converters: Concept, Architectures, and Realization.” IEEE Journal of Emerging and Selected Topics in Power Electronics 9.3 (2020): 3582-3597.
17. Baka, Srinivas, S. Sashidhar, and B. G. Fernandes. “Design of an energy efficient line-start two-pole ferrite assisted synchronous reluctance motor for water pumps.” IEEE Transactions on Energy Conversion 36.2 (2020): 961-970.
18. Savaliya, Swati G., and Baylon G. Fernandes. “Performance Evaluation of a Modified Bidirectional Z-Source Breaker.” IEEE Transactions on Industrial Electronics 68.8 (2020): 7137-7145.
19. A. Vettuparambil, K. Chatterjee and B. G. Fernandes, “A Multiport Converter Interfacing Solar Photovoltaic Modules and Energy Storage with DC Microgrid,” in IEEE Transactions on Industrial Electronics.
20. Neethu S, S. P. Nikam, S. Pal, A. K. Wankhede and B. G. Fernandes, “Performance Comparison Between PCB-stator and Laminated-core-stator Based Designs of Axial Flux Permanent Magnet Motors for High-speed Low-power Applications,” IEEE Transactions on Industrial Electronics, 2019. [Early Access Article]
21. Neethu S, Saurabh Nikam, B. G. Fernandes, S. Pal, and A. K. Wankhede, “Multiphysics Analysis of Printed Circuit Board Winding for High-Speed AFPM Motor,” IET Electric Power Applications, 2019, DOI: 10.1049/iet-epa.2018.5752
    
22. S. G. Savaliya and B. G. Fernandes, “Analysis and Experimental Validation of Bi-directional Z-source DC Circuit Breakers,” in IEEE Transactions on Industrial Electronics (Early Access)
    
23. Neethu S., S.P. Nikam, Sumeet Singh, Saumitra Pal, A K Wankhede, and B.G. Fernandes, “High-Speed Coreless Axial Flux Permanent Magnet Motor with Printed Circuit Board Winding”, IEEE Transactions on Industry Application.
    
24. Shambhu Sau, Saurabh P. Nikam, and B. G. Fernandes, “Coupled Inductor Based Regenerative Cascaded Mul-ticell Converter for Drives with Multilevel Voltage Operation at both Input and Output Sides”, Early access in IEEE Transactions on Industrial Electronics.
    
25. Shambhu Sau and B. G. Fernandes, “Modular Multilevel Converter Based Variable Speed Drive with Reduced Capacitor Ripple Voltage”, IEEE Transactions on Industrial Electronics, vol. 66, no. 5, pp. 3412-3421, May 2019.
    
26. O. V. Kulkarni, S. Doolla and B. G. Fernandes, “Simple Controller Configuration for Decentralized Parallel Operation of Inverters,” in IEEE Transactions on Power Electronics, vol. 34, no. 2, pp. 1356-1369, Feb. 2019.
    
27. S. Sashidhar, V. Guru Prasad Reddy and B. G. Fernandes, “A Single-Stage Sensorless Control of a PV based Bore-Well Submersible BLDC Motor”, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. PP, no. 99, pp. 1-8, Feb. 2018. (Early access)
    
28. V. V. S. P. Kumar and B. G. Fernandes, “Switching strategy for improving the lifetime of dc-link capacitor in a fault-tolerant active power decoupling topology,” IET Power Electronics, vol. 11, no. 1, pp. 52-61, Feb. 2018.
    
29. Shambhu Sau and B. G. Fernandes, “Modular Transformer based Regenerative Cascaded Multicell Converter for Drives with Multilevel Voltage Operation at both Input and Output Sides,” IEEE Transactions on Industrial Electronics, vol. PP, no.99, pp.1-11, Nov. 2017. (Early access)
    
30. V. V. S. P. Kumar and B. G. Fernandes, “A fault-tolerant single-phase grid-connected inverter topology with enhanced reliability for solar PV applications,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 5, no. 3, pp. 1254-1262, Sept. 2017.
    
31. Indrajit Sarkar and B. G. Fernandes, “A nine-level hybrid symmetric cascaded multilevel converter for induction motor drive”, Sadhana, vol. 42, no. 8, pp. 1389-1400, Aug 2017.
    
32. Onkar Vitthal Kulkarni, Suryanarayana Doolla and B. G. Fernandes, “Mode Transition Control Strategy for Multiple Inverter-Based Distributed Generators Operating in Grid-Connected and Standalone Mode,” IEEE Transactions on Industry Applications, Vol. 53, no. 6, pp. 5927-5939, Aug. 2017.
    
33. S. Sashidhar and B. G. Fernandes, “A Novel Ferrite SMDS Spoke-Type BLDC Motor for PV Bore-Well Submersible Water Pumps,” in IEEE Transactions on Industrial Electronics, vol. 64, no. 1, pp. 104-114, Jan. 2017.
    
34. S. Sashidhar and B. G. Fernandes, “Braking Torque Due to Cross Magnetization in Unsaturated IPM BLDC Machines and Its Mitigation,” in IEEE Transactions on Magnetics, vol. 53, no. 1, pp. 1-9, Jan. 2017.
    
35. C. Anandababu and B. G. Fernandes, “Neutral Point Clamped MOSFET Inverter With Full-Bridge Configuration for Nonisolated Grid-Tied Photovoltaic System,” in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 5, no. 1, pp. 445-457, Jan 2017.
    
36. C. Anandababu and B. G. Fernandes, “Leakage current generation in view of circuit topology of non-isolated full-bridge neutral point clamped grid-tied photovoltaic inverters,” in IET Power Electronics, vol. 9, no. 8, pp. 1571-1580, June 2016.
    
37. B. Mangu, S. Akshatha, D. Suryanarayana and B. G. Fernandes, “Grid-Connected PV-Wind-Battery-Based Multi-Input Transformer-Coupled Bidirectional DC-DC Converter for Household Applications,” in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, no. 3, pp. 1086-1095, Sept. 2016.
    
38. V. Y. Vekhande, V. K. Kanakesh, and B. G. Fernandes, “Control of Three-phase Bidirectional Current Source Converter to Inject Balanced Three-phase Currents under Unbalanced Grid Voltage Condition,” in IEEE Transactions on Power Electronics, 2015.
    
39. V. Y. Vekhande, Nimish Kothari and B. G. Fernandes, “Switching State Vector Selection Strategies for Paralleled Multilevel Current-Fed Inverter under Unequal DC-links Currents Condition,” IEEE Trans. on Power Electronics, vol. 30, no. 4, pp. 1998-2009, April 2015.
    
40. R. Vandana and B. G. Fernandes, “Design Methodology for High Performance Segmented Rotor Switched Reluctance Motors,” IEEE Trans. on Energy Conversion, vol. 30, no. 1, pp. 11-21, March 2015.
    
41. S. Anand, S. Kashyap and B. G. Fernandes, “Transformer-less Grid Feeding Current Source Inverter for Solar Photovoltaic System,” IEEE Trans. on Industrial Electronics, vol. 61, no. 10, pp. 5334-5344, Oct. 2014.
    
42. R. Madhavan and B. G. Fernandes, “Performance Improvement in Axial Flux Segmented Rotor Switched Reluctance Motor,” IEEE Trans. on Energy Conversion, vol. 29, no. 3, pp. 641-651, Sept. 2014.
    
43. N. N. V. Surendra Babu and B. G. Fernandes, “Cascaded Two Level Inverter based Multilevel STATCOM for High Power Application,” IEEE Trans. on Power Delivery, vol. 29, no. 3, pp. 993-1001, June 2014.
    
44. R. Vandana and B. G. Fernandes, “Design Procedure of Segmented Rotor Switched Reluctance Motor for Direct Drive Application,” IET Electric Power Application, vol. 8, no. 3, pp. 77-88, March 2014
    ⭐ 2016 IET Premium (Best Paper) Award
45. S. Anand and B. G. Fernandes, “Reduced Order Model and Stability Analysis of Low Voltage DC Microgrid,” IEEE Trans. on Industrial Electronics, vol. 60, no. 11, pp. 5040-5049, Nov. 2013.
    
46. S. Anand, B. G. Fernandes and J. Guerrero, “Distributed Control to Ensure Proportional Load Sharing and Improve Voltage Regulation in Low Voltage DC Microgrids,” IEEE Trans. on Power Electronics, vol. 28, no. 4, pp. 1900-1913, April 2013.
    
47. R. Madhavan and B. G. Fernandes, “Axial Flux Segmented SRM with a Higher Number of Rotor Segments for Electric Vehicles,” IEEE Trans. on Energy Conversion, vol. 28, no. 1, pp. 203-213, March 2013.
    
48. D. S. More and B. G. Fernandes, “Modeling and Performance of Three Phase 6/14 Pole Flux Reversal Machine,” IET Electric Power Applications, vol. 7, no. 2, pp. 131-139, Feb. 2013.
    
49. S. Anand, K. Chatterjee and B. G. Fernandes, “DC Voltage Controller for Asymmetric Twin Converter Topology Based High Power STATCOM,” IEEE Trans. on Industrial Electronics, vol. 60, no. 1, pp. 11-19, Jan. 2013.
    
50. S. P. Nikam, R. Vandana and B. G. Fernandes, “A High Torque Density Permanent Magnet Free Motor for In-wheel Electric Vehicle Application,” IEEE Trans. on Industry Application, vol. 48, no. 6, pp. 2287-2295, Nov. 2012.
    
51. S. Anand, R. S. Farswan and B. G. Fernandes, “Unique Power Electronics and Drives Experiment Bench (PEDEB) to Facilitate Learning and Research,” IEEE Trans. on Education, vol. 55, no. 4, pp. 573-579, Nov. 2012.
    
52. D. V. Ghodke, K. Chatterjee and B. G. Fernandes, “Modified Soft Switched Three-phase Three Level DC-DC Converter for High Power Applications having Extended Duty Cycle Range,” IEEE Trans. on Industrial Electronics, vol. 59, no. 9, pp. 3362-3372, Sept. 2012.
    
53. N. N. V. Surendra Babu and B. G. Fernandes, “Cascaded Two Level Inverter based Multilevel Static VAr Compensator using 12-sided Polygonal Voltage Space Vector Modulation,” IET Power Electronics, vol. 5, no. 8, pp. 1500-1509, Sept. 2012.
    
54. R. Vandana, S. Nikam and B. G. Fernandes, “A High Torque Poly-phase Segmented Switched Reluctance Motor with Novel Excitation Strategy,” IET Electric Power Applications, vol. 6, no. 7, pp. 375-384, Aug. 2012.
    
55. S. Anand and B. G. Fernandes, “Modified Droop Controller for Paralleling of DC-DC Converters in Standalone DC System,” IET Power Electronics, vol. 5, no. 6, pp. 782-789, July 2012.
    
56. D. S. More and B. G. Fernandes, “Analysis of Flux Reversal Machine based on Fictitious Electrical Gear,” IEEE Trans. on Energy Conversion, vol. 25, no. 4, pp. 940-947, Dec. 2010.
    
57. D. S. More and B. G. Fernandes, “Power density improvement of three phase flux reversal machine with distributed winding”, IET Electric Power Applications, vol. 4, no. 2, pp. 109-120, Feb. 2010.
    
58. D. V. Ghodke, E. S. Sreeraj, K. Chatterjee and B. G. Fernandes, “One-Cycle-Controlled Bidirectional AC-to-DC Converter With Constant Power Factor,” IEEE Trans. on Industrial Electronics, vol. 56, no. 5, pp.1499-1510, May 2009.
    
59. D. S. More, Hari Kalluru and B. G. Fernandes, “Design and Analysis of full pitch winding and concentrated stator pole winding three-phase flux reversal machine for low speed application”, Sadhana, Vol.33(5), pp.671-688, Oct. 2008.
    
60. D. V. Ghodke, K. Chatterjee and B. G. Fernandes, “Modified one cycle controlled bi-directional high power factor ac-dc converter”, IEEE Trans. on Industrial Electronics, vol. 55, no. 6, pp. 2459-2472, May 2008.
    
61. D. V. Ghodke, K. Chatterjee and B. G. Fernandes, “Three phase Three level, soft switched Phase shifted PWM DC-DC converter for high power applications,” IEEE Trans. on Power Electronics, vol. 23, no. 3, pp. 1214-1227, May, 2008.
    
62. Sachin Hirve, Kishore Chatterjee, B. G. Fernandes, “PLL-less active power filter based on one cycle control for compensating unbalanced loads in three phase four wire system,” IEEE Trans. on Power Delivery, vol. 2, no. 4, pp. 2457-2465, Oct. 2007.
    
63. I. Tamrakar, L. B. Shilpakar, B. G. Fernandes and R. Nilsen, “Voltage and frequency control of parallel operated synchronous generator and induction generator with STATCOM in micro hydro scheme,” IET Generation, Transmission and Distribution, vol. 1, no. 5, pp. 743-750, Sept. 2007.
    
64. Jagjit Shukla and B. G. Fernandes, “A Three phase soft switched PWM inverter for motor drive application” IEE proceedings, Electric Power Applications, vol. 1, no. 1, pp. 93-104, Jan 2007.
    
65. Jagjit Shukla and B. G. Fernandes, “A Quasi-Resonant DC-Link Soft Switching PWM Inverter With Active Feedback Clamp Circuit for Motor Drive,” IEE Proceedings, Electric Power Applications, vol.153, pp.75-82, Jan 2006.
    
66. A. B. Raju, B. G. Fernandes and K. Chatterjee, “A Reduced Switch Count UPF Power Conditioner for Grid Connected Variable Speed Wind Energy Conversion System Employing Permanent Magnet Synchronous Generators,” International Journal of Energy Technology and Policy, vol.2, pp.284-299, 2004.
    
67. B. N. Chaudhari and B. G. Fernandes, “Performance of line start permanent magnet synchronous motor with single-phase supply system,” IEE Proceedings, Electric Power Applications, vol.151, no. 1, pp. 83-90, Jan 2004.
    
68. J. J. Jafar and B. G. Fernandes, “A new quasi-resonant DC-link PWM inverter using single switch for soft switching,” IEEE Trans. on Power Electronics, vol. 17, No. 6, pp. 1010-1016, November 2002.
    
69. Kishore Chatterjee, B. G. Fernandes and G. K. Dubey, “A novel high-power low-distortion synchronous link converter-based load compensator without the requirement of VAr calculator,” IEEE Trans. on Industrial Electronics, vol.47, pp.542-548, June 2000.
    
70. Kishore Chatterjee, B. G. Fernandes and Gopal K. Dubey, “A simplified control strategy for a high power low distortion static var compensator,” IEEE Trans. on Power Delivery, vol.15, No.2, pp. 652-658, April, 2000.
    
71. Kishore Chatterjee, B. G. Fernandes and Gopal K. Dubey, “A novel high power self-commutated static var compensator for load compensation,” International Journal of Electronics, vol. 86, No. 10, pp. 1233-1247, October, 1999.
    
72. Kishore Chatterjee, B. G. Fernandes and Gopal K. Dubey, “New high power low distortion synchronous link converter var compensator,” IEE Proceedings, Electric Power Applications, vol. 146, No. 3, pp. 325-334,May, 1999.
    
73. Kishore Chatterjee, B. G. Fernandes and Gopal K. Dubey, “An instantaneous reactive volt-ampere compensator and harmonic suppressor system,” IEEE Trans. on Power Electronics, vol 14, No. 2, pp. 381–392, March 1999.

1. P. A. D'sa, A. Kushwaha, S. Dey, S. Sengupta and B. G. Fernandes, “Design and Analysis of Single-phase Synchronous Reluctance Motor for Ceiling Fan Applications”, IEEE International Magnetics Conference (INTERMAG 2026), Manchester, UK.
2. A.K. Das and B.G. Fernandes, “Variable Leakage Inductance High-frequency Transformer Having Current-dependent Characteristics Inherent to the Magnetics Design”, IEEE International Magnetics Conference (INTERMAG 2026), Manchester, UK.
3. A.K. Das and B.G. Fernandes, “Improved Parallel Plate Capacitor Model Considering Edge Effect Using Correction Factor Derived Based on Regression Analysis”, IEEE International Magnetics Conference (INTERMAG 2026), Manchester, UK.
4. S. Dey and B. G. Fernandes, “Importance of Rotor Segmentation in a Novel Hybrid-excited Synchronous Machine Configuration”, IEEE International Magnetics Conference (INTERMAG 2026), Manchester, UK.
5. Supratap Sengupta and B.G. Fernandes, “Impact of Rotor Saliency on Air-gap Flux Density Distribution and Subsequent Electromagnetic Stress of Permanent Magnet Motors”, IEEE International Magnetics Conference (INTERMAG 2026), Manchester, UK.
6. Priya, S. Anand, and B. G. Fernandes, “Enhancing Efficiency and Increasing Leakage Inductance by Using Aluminium Foil Winding in Transformer for Dual Active Bridge Converter”, IEEE Applied Power Electronics Conference and Exposition (APEC) 2026, Texas, USA.
7. R. K. Shukla, D. Pal, D. Saha and B. G. Fernandes, “A Decoupled Control Methodology for Stable Operation of Current-Fed Quad Active Bridge Converters,” IEEE Applied Power Electronics Conference and Exposition (APEC) 2026, Texas, USA.
   ⭐ Outstanding presentation.
8. S. Mathew, R. M. Ram Kumar, B. G. Fernandes and R. Singh, “Novel Design Solution for Minimization of Low Frequency Torque Oscillation in High-Speed Laminated Rotor Induction Motors,” 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), Philadelphia, PA, USA, 2025.
9. J. J. Attukadavil and B. G. Fernandes, “A Capacitive Isolated Series Stacked Dual Active Bridge Converter for Medium Voltage DC Applications,” 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), Philadelphia, PA, USA, 2025.
10. M. Wankhede, S. Dey, A. K. Das and B. G. Fernandes, “Investigations on Series Resonant Converter Feeding High- Q Load in Three-Winding Rotary Transformer-Based Brushless Bipolar Field Excitation System for EESM/HESM,” 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), Philadelphia, PA, USA, 2025.
11. S. Chakrabarty, J. Kumar and B. G. Fernandes, “Impact of Outer Magnet Size and Placement on the Performance of Permanent Magnet Assisted Synchronous Reluctance Motor for EV Application,” 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), Philadelphia, PA, USA, 2025.
12. A. K. A and B. G. Fernandes, “Multiport Converter to Balance Power in Cascaded H-Bridge Converters for Large-Scale Photovoltaic Integration,” 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), Philadelphia, PA, USA, 2025.
13. S. Sengupta and B. G. Fernandes, “Vibration Monitoring of PM Motors Using Electromagnetic Stress Harmonic Excitation,” 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), Philadelphia, PA, USA, 2025.
14. R. K. Shukla, D. Saha and B. G. Fernandes, “A Multifunctional Current-Fed Quad-Active Bridge Converter for On-Board Charging and Auxiliary Power in HESS-Based EVs,” IECON 2025 – 51st Annual Conference of the IEEE Industrial Electronics Society, Madrid, Spain, 2025, pp. 1-6.
15. M. Wankhede, S. Dey, A. K. Das and B. G. Fernandes, “PCB Winding-based High-frequency Three-winding Rotary Transformer Enabling Brushless Bipolar Field Control from Stator of EESM/HESM,” 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 2025.
16. N. Kamarajugadda, B. G. Fernandes and K. Chatterjee, “Multifunctional Onboard Charger for Electric Vehicles with Single and Three phase Grid Compatibility,” 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 2025.
17. N. Kamarajugadda, S. S. Kadiyala, B. G. Fernandes and K. Chatterjee, “Design Optimization of a 7.2 kW Totem-pole Power Factor Correction Converter for Onboard Electric Vehicle Charger,” 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 2025, pp. 1-6.
18. N. Kamarajugadda, J. J. C. Attukadavil, B. G. Fernandes and K. Chatterjee, “A Novel Start-up Methodology for GaN HEMT-Based Ripple Power Compensation Integrated Totem-Pole PFC Converters,” 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 2025, pp. 1-6.
19. V. M. J. and B. G. Fernandes, “A Novel Topology of PM-assisted Synchronous Reluctance Motor with Fluid Flux Barriers and Rectangular Magnets,” 2025 IEEE International Electric Machines & Drives Conference (IEMDC), Houston, TX, USA, 2025, pp. 886-891.
20. S. Dey, B. G. Fernandes and K. Chatterjee, “Effect of Permanent Magnet Shape in High-Speed Rotor on the Performance of a Magnetic Gear,” 2025 IEEE International Electric Machines & Drives Conference (IEMDC), Houston, TX, USA, 2025, pp. 1011-1016.
21. Vishal M. J., Harikrishnan S. and B. G. Fernandes, “Novel Line-Start Rib-Less PM-Assisted Synchronous Reluctance Motor for Submersible Bore-Well Pump,” 2024 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Mangalore, India, 2024, pp. 1-6.
    ⭐ Best paper award
22. M. Wankhede, S. Dey, A. K. Das and B. G. Fernandes, “Investigations on Rotary Transformer Configurations for Brushless Operation of Electrically-Excited Synchronous Machines,” 2024 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Mangalore, India, 2024, pp. 1-6.
23. J. J. C. Attukadavil and B. G. Fernandes, “A Generalised Harmonic Model of an Integrated Three Dual Active Bridge Converter with Different Transformer Configuration,” 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 2025.
24. J. J. C. Attukadavil and B. G. Fernandes, “Topology Selection and Design Methodology for SiC-based Solar Photovoltaic Medium Voltage Direct Grid Connect Inverters”, IEEE-APEC 2025, Atlanta, GA, USA.
25. J. Kumar and B. G. Fernandes, “Comparison of Surface and Inset Bread-loaf PMSM with Parallel and Novel Magnetization Orientations for Electric VTOL/Aircraft Application,” IECON 2024 - 50th Annual Conference of the IEEE Industrial Electronics Society, Chicago, IL, USA, 2024, pp. 1-6.
26. S. Dey, A. K. Das and B. G. Fernandes, “A Novel Brushless Excitation System Capable of Bipolar Field Current Control from the Stator of Electrically/Hybrid-Excited Synchronous Motor,” 2024 27th International Conference on Electrical Machines and Systems (ICEMS), Fukuoka, Japan, 2024, pp. 2972-2977.
27. R. K. Shukla, D. Pal, D. Saha and B. G. Fernandes, “A Methodology to Solve the Instability Issue in Decoupled Controller for Current Fed Triple Active Bridge Converter,” 2024 IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, AZ, USA, 2024, pp. 4158-4163.
28. A. K. Das and B. G. Fernandes, “Minimizing Both Leakage Inductance and Winding Capacitance in a 1:1 High-frequency Transformer Using Fully Interleaved and Interposed Winding,” 2024 IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, AZ, USA, 2024, pp. 5103-5110.
29. P. A. D’sa, S. Dey, A. Kushwaha and B. G. Fernandes, “Design and Analysis of Single-Phase, Two-Speed, Line-Start Synchronous Reluctance Motor for Ceiling Fan Applications,” 2024 IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, AZ, USA, 2024, pp. 5090-5097.
30. S. Dey, P. A. D’sa and B. G. Fernandes, “A Novel Segmented-Rotor Hybrid-Excited Synchronous Motor for In-Wheel Two-Wheeler Applications,” 2024 IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, AZ, USA, 2024, pp. 5193-5198.
31. J. J. C. Attukadavil, A. Nadkarni and B. G. Fernandes, “A 300 VA Low-Cost Efficient Standalone Photovoltaic System for Rural Applications,” 2024 IEEE International Communications Energy Conference (INTELEC), Bengaluru, India, 2024, pp. 1-6.
    ⭐ Best paper award
32. S. Sengupta and B. G. Fernandes, “Impact of Electric and Magnetic Loading on the Electromagnetic Stress of PM Machines,” 2024 International Conference on Electrical Machines (ICEM), Torino, Italy, 2024, pp. 1-7.
33. V. M. J. and B. G. Fernandes, “Design Optimization of Ferrite-Assisted Synchronous Reluctance Motor with Fluid Flux Barriers and Rectangular Magnets,” 2024 International Conference on Electrical Machines (ICEM), Torino, Italy, 2024, pp. 1-7.
34. S. Dey and B. G. Fernandes, “A Novel Segmented-Rotor Hybrid-Excited Synchronous Motor for Electric Vehicle Application,” 2024 International Conference on Electrical Machines (ICEM), Torino, Italy, 2024, pp. 1-7.
35. S. Dey, B. G. Fernandes and K. Chatterjee, “Design Optimisation and Torque Matching of a Magnetic Geared Switched Reluctance Motor for In-wheel Application,” 2024 IEEE Transportation Electrification Conference and Expo (ITEC), Chicago, IL, USA, 2024, pp. 1-6.
36. S. Dey, B. G. Fernandes and K. Chatterjee, “A High Torque Density Magnetic Geared Switched Reluctance Motor for In-wheel Applications,” 2024 IEEE Transportation Electrification Conference and Expo (ITEC), Chicago, IL, USA, 2024, pp. 1-6.
37. J. Kumar and B. G. Fernandes, “Improvements in THD and Demagnetization of the Rare-Earth-Free Interior Permanent Magnet Synchronous Reluctance Motor with Novel Magnetization Orientations for EV Application,” 2024 IEEE Transportation Electrification Conference and Expo (ITEC), Chicago, IL, USA, 2024, pp. 1-6.
38. S. Dey, B. G. Fernandes and K. Chatterjee, “A Novel Magnetic Gear Integrated Segmented Rotor SRM with Reduced Rare-Earth Material,” 2024 IEEE International Conference on Industrial Technology (ICIT), Bristol, United Kingdom, 2024, pp. 1-6.
39. M. J. Vishal and B. G. Fernandes, “Optimisation of PM-Assisted Synchronous Reluctance Motor with Rectangular Flux Barriers,” 2024 IEEE International Conference on Industrial Technology (ICIT), Bristol, United Kingdom, 2024, pp. 1-6.
40. A. K. Das and B. G. Fernandes, “Derivation of an Optimal Winding Configuration for Minimizing the Effect of Winding Capacitances in a Two-winding High-frequency Transformer,” 2024 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA, 2024, pp. 3255-3262.
41. N. Kamarajugadda, A. A. Kushwaha, B. G. Fernandes and K. Chatterjee, “Magnetic Integrated High Frequency Transformer Based Dual Active Bridge for Multifunctional Onboard EV Charger,” 2024 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA, 2024, pp. 3151-3156.
42. M. J. Vishal, A. Kushwaha and B. G. Fernandes, “Design Improvement of a Line-Start Ferrite-Assisted Synchronous Reluctance Motor,” 2023 11th National Power Electronics Conference (NPEC), Guwahati, India, 2023, pp. 1-6.
43. S. Dey, P. D’Sa, A. Kushwaha and B. G. Fernandes, “Permanent Magnet AC Machines for LCI-fed Medium Voltage Applications,” 2023 11th National Power Electronics Conference (NPEC), Guwahati, India, 2023, pp. 1-6.
44. R. K. Shukla, B. G. Fernandes and D. Saha, “Multifunctional Triple Active Bridge Converter for EV Application,” 2023 11th National Power Electronics Conference (NPEC), Guwahati, India, 2023, pp. 1-6.
45. A. A. Kushwaha and B. G. Fernandes, “Scaling Laws and Empirical Relations based Initial Sizing of Motor Integrated Electrodynamic Wheel,” 2023 11th National Power Electronics Conference (NPEC), Guwahati, India, 2023, pp. 1-6.
46. S. Dey, B. G. Fernandes and K. Chatterjee, “A Novel Magnetic Geared Switched Reluctance Motor with Reduced Number of Air-gaps,” 2023 11th National Power Electronics Conference (NPEC), Guwahati, India, 2023, pp. 1-6.
47. P. A. D’Sa, K. Narang, A. Kushwaha and B. G. Fernandes, “Investigation of Induction Motor Rotor Bar Shapes for Energy Efficient Ceiling Fan Application,” 2023 11th National Power Electronics Conference (NPEC), Guwahati, India, 2023, pp. 1-6.
48. S. Dey, B. G. Fernandes and K. Chatterjee, “Effect of Gear Ratio on a Magnetic Gear Integrated Switched Reluctance Motor,” IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, Singapore, 2023, pp. 1-6.
49. J. Kumar and B. G. Fernandes, “Multi-three-phase FSCW High-speed High-power-dense Inset Bread-loaf PMSM for the Electric VTOL Application,” 2023 IEEE International Electric Machines & Drives Conference (IEMDC), San Francisco, CA, USA, 2023, pp. 1-7.
50. S. Sengupta, N. Endla, A. Kushwaha and B. G. Fernandes, “Modelling and Analysis of PM Demagnetization and its Effect on Vibration in SPM Machines,” 2023 IEEE 14th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), Chania, Greece, 2023, pp. 377-382.
51. A. Kushwaha, T. Patel and B. G. Fernandes, “Design and Development of a Portable Conductivity Measurement Instrument as an Aid for Teaching Power Electronics at Undergraduate Level,” 2022 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Jaipur, India, 2022, pp. 1-5.
52. Priya, A. K. Das, S. Anand and B. G. Fernandes, “Effect of Material Resistivity and Temperature on Leakage Inductance of Medium Frequency Transformers Made of Al and Cu Foils,” IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 2022, pp. 1-6.
53. N. Kamarajugadda, B. G. Fernandes and K. Chatterjee, “7.2 kW Multifunctional and Integrated On-board Electric Vehicle Charger,” IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 2022, pp. 1-6.
54. J. Attukadavil, S. Anand and B.G. Fernandes, “An Adaptive DC Voltage Control for SiC based Medium Voltage Photovoltaic Inverter,” 2022 IEEE Energy Conversion Congress and Exposition (ECCE), 2022, pp. 1-7.
55. Mathew, Silba, Kumar, R. R., Endla, N. K., Vundru, C., Singh, R., & Fernandes, B. G., “Development of a Hybrid Rotor Structure for high-speed Laminated Rotor Induction Motor.” 2021 IEEE International Electric Machines & Drives Conference (IEMDC). IEEE, 2021.
56. Kumar, RM Ram, et al. “Improving the Saliency of a High Speed SynRel Rotor by using High Strength Martensitic Sleeve.” 2021 International Conference on Sustainable Energy and Future Electric Transportation (SEFET). IEEE, 2021.
57. Das, Annoy Kumar, and Baylon G. Fernandes. “Study of Frequency-dependent Parasitics' Effects on Resonance Frequencies of a Two-winding Medium/High-frequency Transformer.” 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2020.
58. Das, Annoy Kumar, Akshatha Shetty, and Baylon G. Fernandes. “Aiding Effects of Interleaving to Improve Design Performances of a Line-frequency Zig-Zag Transformer Employed in a Unified AC-DC System.” 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2020.
59. Das, Annoy Kumar, and Baylon G. Fernandes. “Accurate capacitance calculation of multi-layer foil windings in a medium/high-frequency high-power transformer.” 2020 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2020.
60. Das, Annoy Kumar, and Baylon G. Fernandes. “Calculation of model based capacitances of a two-winding high-frequency transformer to predict its natural resonance frequencies.” 2020 IEEE Industry Applications Society Annual Meeting. IEEE, 2020.
61. Ahmad, Ishtiyaque, and B. G. Fernandes. “Concept of Universal USB Charger.” 2020 IEEE Industry Applications Society Annual Meeting. IEEE, 2020.
62. Mathew, Silba, RM Ram Kumar, and B. G. Fernandes. “A novel rotor bar shape for enhancing the torque density of high-speed induction motor.” 2020 International Conference on Electrical Machines (ICEM). Vol. 1. IEEE, 2020.
63. Kumar, RM Ram, et al. “A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet.” 2020 IEEE Transportation Electrification Conference & Expo (ITEC). IEEE, 2020.
64. Kumar, RM Ram, et al. “Hybrid magnet configuration to reduce the content of rare earth elements in a pm-synrel machine.” 2020 IEEE Transportation Electrification Conference & Expo (ITEC). IEEE, 2020.
65. R. M. R. Kumar et al., “High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles,” IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, 2019, pp. 1083-1088.
66. R. M. R. Kumar et al., “Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier,” IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, 2019, pp. 4347-4352.
67. A. K. Das, A. Shetty and B. G. Fernandes, “Efficiency Characterization and Optimal Power Sharing in a Unified AC-DC System employing a Line-frequency Zig-Zag Transformer with High Winding Leakage Inductance,” 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, 2019, pp. 1-8.
68. K.A. Ajith, B.G. Fernandes, “Elimination of Phase Unbalance in Cascaded Multilevel Converters for Large Scale Photovoltaic Grid Integration”, 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA
69. Shambhu Sau, Arun Chandrasekharan Nair and B. G. Fernandes, “Theoretical Analysis and Comparison of Capacitor Requirement in Modular Converters for Integration of Large Scale Solar PV to Grid”, 2019 IEEE Energy Conversion Congress and Exposition (ECCE’19), Baltimore, MD, USA.
70. Rishab Anand and B. G. Fernandes, “Simplified Control Strategy for an Inhomogeneous Series-Connected Battery String,” 2019 IEEE Energy Conversion Congress and Exposition (ECCE), Baltimore, MD, USA.
    
71. A. K. Das, A. Shetty and B. G. Fernandes, “Optimal Design and Experimental Validation of a Novel Line-frequency Zig-Zag Transformer Employed in a Unified AC-DC System,” 2019 IEEE International Conference on Industrial Technology (ICIT), Melbourne, Australia, 2019, pp. 298-303.
    
72. A. K. Das, A. Shetty and B. G. Fernandes, “Design Methodology of a Line-Frequency Zig-Zag Transformer to Utilize its Winding Leakage Inductances as Integrated Boost-Inductances in a Unified AC-DC System,” 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, 2018, pp. 3198-3205.
    
73. S. Akshatha, Rupali Y.V. and B. G. Fernandes, “ Isolated Dual Boost Converter: Controller Design using A new Parameterization”, presented in IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Chennai, 2018.
    
74. Arun Chandrasekharan Nair, B.G. Fernandes, “A Solid State Transformer for Integration of a High Power PV Plant to Medium Voltage Grid”, presented in IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Chennai, 2018.
    
75. Vishal M.J., Arun Chandrasekharan Nair, B.G. Fernandes, “Quad-Active-Bridge DC-DC Converter based On-board Power Electronic Interface for Electric-Vehicle”, presented in IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Chennai, 2018.
    
76. S. Neethu, S. P. Nikam, S. Pal, A. K. Wankhede and B. G. Fernandes, “Radial- and Axial-Flux Synchronous Motors for High-Speed Low-Power Applications”, presented in IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Chennai, 2018.
    
77. Srinivas Baka, S. Sashidhar and B. G. Fernandes, “Effect of Flux Barrier Shape on the Performance of a Two-Pole Line-Start Synchronous Reluctance Motor”, presented in IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Chennai, 2018.
    
78. H. Khan, B. G. Fernandes and A. Kulkarni, “Simultaneous Unbalance and Harmonic Compensation from RESs with Neutral Wire connected to a LV Distribution Grid,” 2018 20th European Conference on Power Electronics and Applications (EPE'18 ECCE Europe), Riga, 2018, pp. P.1-P.10.
    
79. H. Khan, B. G. Fernandes and A. Kulkarni, “Decoupled Controller for Simultaneous Harmonic and Unbalance Compensation in a multifunctional RES system connected to a LV Distribution Grid,” 2018 20th European Conference on Power Electronics and Applications (EPE'18 ECCE Europe), Riga, 2018, pp. P.1-P.9.
    
80. A. K. Das, A. Shetty and B. G. Fernandes, “Design Methodology of a Line-Frequency Zig-Zag Transformer to Utilize its Winding Leakage Inductances as Integrated Boost-Inductances in a Unified AC-DC System,” 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, 2018, pp. 3198-3205.
    
81. A. Chandrasekharan Nair, M. J. Vishal and B. G. Fernandes, “A Quad Active Bridge Based on-Board Power Electronic Interface for an Electric Vehicle,” 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, 2018, pp. 5941-5947.
    
82. S. Sashidhar, Silba Mathew and B. G. Fernandes, “Novel Toroidal Winding for Efficiency Improvement of a Line-Start Induction Motor,” IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, D.C., DC, USA, 2018, pp. 607-612.
    
83. A. C. Nair and B. G. Fernandes, “A Solid State Transformer based Fast Charging Station for all Categories of Electric Vehicles,” IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, D.C., DC, USA, 2018, pp. 1989-1994.
    
84. A. Shetty, B. G. Fernandes, J. O. Ojo and J. A. Ferreira, “Three Phase PWM Rectifier with Integrated Battery for Automotive Applications,” 2018 IEEE Industry Applications Society Annual Meeting (IAS), Portland, OR, 2018, pp. 1-6.
    
85. S. Baka, S. Sashidhar and B. G. Fernandes, “Design and Optimization of a Two-Pole Line-Start Ferrite Assisted Synchronous Reluctance Motor,” 2018 XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, 2018, pp. 131-137.
    
86. A. K. Das, Z. Wei, B. G. Fernandes, H. Tian, M. P. Thevar, S. Cao, V. B. Sriram, A. Tripathi and P. C. Kjaer, “Multi-variable optimization methodology for medium-frequency high-power transformer design employing steepest descent method,” 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), San Antonio, TX, 2018, pp. 1786-1793.
    
87. S. Savaliya and B. G. Fernandes, “Modified Bi-Directional Z-Source Breaker with Re-closing and Re-breaking Capabilities”, accepted in IEEE Applied Power Electronics Conference and Exposition (APEC), 2018.
    
88. Srinivas Baka, S. Sashidhar and B. G. Fernandes, “Multi-Barrier Two-Pole Line-Start Synchronous Reluctance Motor with High Saliency for a Bore-Well Submersible Pump”, presented in 19th Annual IEEE-IES Industrial Technology International Conf., Lyon, Feb 2018.
    
89. S. Neethu, S. P. Nikam, Saumitra Pal, Ashok K Wankhede and B. G. Fernandes, “Toroidal Winding with Fictitious Slots for High Speed Permanent Magnet Synchronous Motors”, presented in 19th Annual IEEE-IES Industrial Technology International Conf., Lyon, Feb 2018.
    
90. Huma Khan, B. G. Fernandes and Anil Kulkarni, “Unified controller for overvoltage prevention, islanding detection and LVRT at high penetration of PV systems connected to a LV grid”, 2017 IEEE Power and Energy Society General Meeting, Chicago, 2017, pp. 1-5.
    
91. Arun Chadrasekharan Nair and B. G. Fernandes, “A novel multi-port solid state transformer enabled isolated hybrid microgrid architecture”, 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, 2017, pp. 651-656.
    
92. Shambhu Sau and B. G. Fernandes, “Modular multilevel converter based variable speed drives with constant capacitor ripple voltage for wide speed range”, 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, 2017, pp. 2073-2078.
    
93. S. Neethu, Saumitra Pal, A. K. Wankhede and B. G. Fernandes, “High performance axial flux permanent magnet synchronous motor for high speed applications”, 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, 2017, pp. 5093-5098.
    
94. Akshatha Shetty, B. G. Fernandes, Olorunfemi Ojo and J. A. Ferreira, “Low-Voltage PV power integration for variable frequency drives application”, 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, 2017, pp. P.1 - P.10.
    
95. Swati Savaliya and B. G. Fernandes, “Comparative analysis and coordination study of Bi-directional Z-source breaker with reclosing capabilities”, 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, 2017, pp. P.1 - P.10.
    
96. S. Neethu, S. P. Nikam, A. K. Wankhede, Saumtra Pal and B. G. Fernandes, “High speed coreless axial flux permanent magnet motor with printed circuit board winding”, IEEE Industry Applications Society Annual Meeting, Cincinnati, 2017, pp. 1-6.
    
97. S. Neethu and B. G. Fernandes, “Design, Analysis and Optimization of high-speed Axial Flux Permanent Magnet Synchronous Motor for Centrifuge Application”, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 2017, pp. 1-6.
    
98. A. Datta, R. Farswan, and B. G. Fernandes, “Development of a Two-Stage Transformerless Grid-Tied Photovoltaic Inverter System Using SiC Devices,” IEEE Applied Power Electronics Conference and Exposition (APEC), Tampa, USA, 2017.
    
99. Akshata S., Arun C. N., Abhijit V. S. and B. G. Fernandes, “A Unified AC-DC Micro-grid Architecture for Distribution of AC and DC Power on the same Line,” IEEE Applied Power Electronics Conference and Exposition (APEC), Tampa, USA, 2017.
    
100. Huma Khan, Subin John Chacko, B. G. Fernandes and Anil Kulkarni, “An integrated controller to perform LVRT operation in PV systems connected to a LV grid during balanced and unbalanced faults”, 3rd IEEE International Future Energy Electronics Conference and ECCE Asia, Kaohsiung, 2017, pp. 2002-2007.
     
101. Shambhu Sau, Saikat Karmakar and B. G. Fernandes, “Reduction of capacitor ripple voltage and current in modular multilevel converter based variable speed drives”, 3rd IEEE International Future Energy Electronics Conference and ECCE Asia, Kaohsiung, 2017, pp. 1451-1456.
     
102. C. D. Bhagat, S. P. Nikam, and B. G. Fernandes, “Design and Development of Sensor-less Controller for DC-Operated Mixer-Grinder,” First International Conference on Sustainable Green Buildings and Communities (SGBC), Madras, India, 2016.
     
103. I. Sarkar and B. G. Fernandes, ” Multi-carrier Based Hysteresis Current Control Technique For Five-Level Symmetric Cascaded Multilevel Converter” IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Trivandrum, India, 2016.
     
104. S. Sau and B. G. Fernandes, “High-power regenerative cascaded multicell converter with multilevel input and output,” IEEE International Conference on Industrial Technology (ICIT), Taipei, Taiwan, 2016, pp. 305-310.
     
105. O. V. Kulkarni, S. Doolla and B. G. Fernandes, “Compensator-less structures for droop control of single phase inverters in a flexible microgrid,” 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA, 2016, pp. 2245-2251.
     
106. O. V. Kulkarni, S. Doolla and B. G. Fernandes, “Mode transition control strategy for multiple inverter based distributed generators operating in grid-connected and stand-alone mode,” 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA, 2016, pp. 3376-3382.
     
107. S. Sau and B. G. Fernandes, “Analysis and reduction of capacitor ripple current in modular multilevel converter for variable speed drives,” 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe), Karlsruhe, Germany, 2016, pp. 1-10.
     
108. V. V. S. P. Kumar and B. G. Fernandes, “Minimization of inter-module leakage current in cascaded H-bridge multilevel inverters for grid connected solar PV applications,” 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA, 2016, pp. 2673-2678.
     
109. S. Savaliya, S. Singh and B. G. Fernandes, “Protection of DC system using bi-directional Z-Source Circuit breaker,” IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, 2016, pp. 4217-4222.
     
110. V. V. S. P. Kumar and B. G. Fernandes, “Transformerless active power decoupling topologies for grid connected PV applications,” IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, 2016, pp. 2410-2419.
     
111. A. Saxena and B. G. Fernandes, “Noise and cogging torque reduction in brushless DC ceiling fan,” 2015 18th International Conference on Electrical Machines and Systems (ICEMS), Pattaya, Thailand, 2015, pp. 1334-1338.
     
112. R. S. Farswan, A. Datta, G. Kamble and B. G. Fernandes, “A low leakage transformer-less 3-level DC-DC boost converter for transformer-less PV inverters,” Power Electronics and Applications (EPE'15 ECCE-Europe), 2015 17th European Conference on, Geneva, Switzerland, 2015, pp. 1-10.
     
113. S. Sashidhar and B. G. Fernandes, “Optimal design of photovoltaic based submersible permanent magnet BLDC motor using FEM,” IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, Japan, 2015, pp. 005241-005246.
     
114. Indrajit Sarkar and B. G. Fernandes “9-level Hybrid Symmetric Cascaded Multilevel Converter for Induction Motor Drive,” National Power Electronics Conference (NPEC), Mumbai, India, Dec. 2015.
     
115. V.V.S. Pradeep Kumar, and B. G. Fernandes, “Active power decoupling topology with fault tolerant ability for a single phase grid connected inverter,” in 41st Annual Conference of the IEEE Industrial Electronics Society, IECON, Yokohama, Japan, Nov. 2015.
     
116. Indrajit Sarkar and B. G. Fernandes, “High resolution m-cell symmetric cascaded H-Bridge multilevel inverter with one transistor clamped H-Bridge per phase,” in 41st Annual Conference of the IEEE Industrial Electronics Society, IECON, Yokohama, Japan, Nov. 2015.
     
117. Rajesh S. Farswan and B. G. Fernandes, “Analysis of Different PWM Schemes for 3-level Boost Converter to Reduce Current Stress in DC Link Capacitors of Single Phase NPC Inverter,” presented at PVSC-2015, New Orleans, USA.
     
118. S. Sau and B. G. Fernandes, “Cascaded U-Cell Multilevel Converter for STATCOM Applications,” in EPE-2015 conference, Geneva, Switzerland.
     
119. Rajesh S. Farswan and B. G. Fernandes, “A Low Leakage Transformer-less 3-level DC-DC Boost Converter for Transformer-less PV Inverters,” in of EPE-2015 conference, Geneva, Switzerland.
     
120. V. Y. Vekhande and B. G. Fernandes, “Operation of a Five-level Current Source Converter based PV Power Plant as a STATCOM,” presented at EPE-2015, Geneva, Switzerland.
     
121. C. Anandababu, T. Chakridhar Reddy and B. G. Fernandes, “Multilevel Operation of a PV Fed Grid Connected Current Fed Inverter under Equal and Unequal DC Link Currents,” Proc. of ICIT-2015, Seville, Spain.
     
122. S. Sashidhar and B. G. Fernandes, “Comparison of a Ferrite based Single, Three-phase Spoke and Surface Permanent Magnet BLDC Motor for a PV Submersible Water Pump,” Proc. of ICIT-2015, Seville, Spain.
     
123. Vaibhav Gholase and B. G. Fernandes, “Design of Efficient BLDC Motor for DC Operated Mixer-Grinder,” Proc. of ICIT-2015, Seville, Spain.
     
124. Nimish Kothari and B. G. Fernandes, “A Hybrid Active Islanding Detection Technique for Single-Phase Inverter-Based Distributed Generation System,” Proc. of ICIT-2015, Spain.
     
125. S. P. Nikam and B. G. Fernandes, “Low Cost Electric Drivetrain for Conversion of ICE vehicle into an Electric Vehicle,” Proc. of PEDES-2014, India.
     
126. Rajesh S. Farswan and B. G. Fernandes, “A Low Cost and Reliable Stand-alone Photo-voltaic System,” Proc. of PEDES-2014, Mumbai, India.
     
127. V. V. S. Pradeep Kumar, B. G. Fernandes, “Fault Tolerant Topology for Two Level VSI and Transformerless Grid Connected Inverters,” Proc. of PEDES-2014, Mumbai, India.
     
128. B. Mariappan, B. G. Fernandes and M. Ramamoorty, “A Novel Single-stage Solar Inverter using Hybrid Active Power Filter with Power Quality Improvement,” Proc. of IECON-2014, Dallas, USA.
     
129. Rajesh S. Farswan and B. G. Fernandes, “A Low Cost and Reliable Single Stage Four Switch Photovoltaic System for Rural Area,” Proc. of at IECON-2014, Dallas, USA.
     
130. Rajesh S. Farswan and B. G. Fernandes, “A Low Cost High Reliability Hybrid Switch Single Phase Grid-Tied Inverter,” Proc. of IECON-2014, Dallas, USA.
     
131. S. Sashidhar and B. G. Fernandes, “A Multiphysics Approach for the Design of Bore-well Submersible Spoke-type BLDC Motor,” Proc. of IECON-2014, Dallas, USA (Best Presentation Recognition).
     
132. Indrajit Sarkar and B. G. Fernandes, “Modified Hybrid Multi-carrier PWM Technique for Cascaded H-bridge Multilevel Inverter,” Proc. of IECON-2014, Dallas, USA.
     
133. B. Mangu and B. G. Fernandes, “Multi-Input Transformer Coupled DC-DC Converter for PV-Wind based Stand-Alone Single Phase Power Generating System,” Proc. of IEEE ECCE-2014, Pittsburgh, USA.
     
134. S. Sashidhar and B. G. Fernandes, “A Low-Cost Semi-Modular Dual-Stack PM BLDC Motor for a PV based Bore-well Submersible Pump,” Proc. of IEEE ICEM-2014, Berlin, Germany.
     
135. S. P. Nikam and B. G. Fernandes, “Design of Soft Magnetic Composite based Modular Four Phase SRM for Electrical Vehicle Application,” Proc. of IEEE ICEM-2014, Berlin, Germany.
     
136. Suhas Bhat, S. P. Nikam and B. G. Fernandes, “Design and Analysis of Ferrite Based Permanent Magnet Motor for Electric Assist Bicycle,” Proc. of IEEE ICEM-2014, Berlin, Germany.
     
137. V. Y. Vekhande and B. G. Fernandes, “Central Seven-level Current-fed Inverter with Module-integrated DC-DC Converters for Grid-connected PV Plant,” Proc. of IEEE PVSC-2014, Denver, USA.
     
138. Rohit Suryadevara and B. G. Fernandes, “Modified Direct Instantaneous Torque Control of Switched Reluctance Motor with High Torque Per Ampere and Reduced Source Current Ripple,” Proc. of IEEE IPEC-ECCE Asia-2014, Hiroshima, Japan.
     
139. Rohit Suryadevara and B. G. Fernandes, “Control Technique for Torque Ripple Minimization in Switched Reluctance Motor: An Overview,” Proc. of IEEE International Conference on Industrial and Information Systems-2013, Colombo, Sri Lanka.
     
140. V. Y. Vekhande, R. Vandana and B. G. Fernandes, “Interphase Transformer-based Three-phase Seven-level Current-fed Inverter,” Proc. of NPEC 2013, Kanpur, India.
     
141. R. Vandana and B. G. Fernandes, “Switched Reluctance Motor for Hybrid Electrical Vehicle,” Proc. of IEEE ICPS-2013, Khathmandu, Nepal.
     
142. C. Anandababu and B. G. Fernandes, “A Novel Neutral Point-Clamped Transformerless Inverter for Grid-Connected Photovoltaic System,” Proc. of IEEE IECON-2013, Vienna, Austria.
     
143. C. Anandababu and B. G. Fernandes, “Improved Full-Bridge Neutral Point-Clamped Transformerless Inverter for Photovoltaic Grid-Connected System,” Proc. of IEEE IECON-2013, Vienna, Austria.
     
144. S. Sau, Vandana R and B. G. Fernandes, “A New Direct Torque Control Method for Switched Reluctance Motor with High Torque/Ampere,” Proc. of IEEE IECON-2013, Vienna, Austria.
     
145. S. P. Nikam, S. Sau and B. G. Fernandes, “Design of Switched Reluctance Motor based Electric Drive-train for Intra-campus Two Wheeler,” Proc. of IEEE IECON-2013, Vienna, Austria.
     
146. V. Y. Vekhande and B. G. Fernandes, “Central Multilevel Current-fed Inverter with Module Integrated DC-DC Converters for Grid-connected PV Plant,” Proc. IEEE ECCE-2013, Denver, USA.
     
147. V. Y. Vekhande and B. G. Fernandes, “Space Vector Modulation Strategy for Three-phase Multilevel Current-fed Inverter with Unequal DC-link Currents,” Proc. of IEEE ECCE Asia-2013, Melbourne, Australia.
     
148. B. Mangu and B. G. Fernandes, “Efficiency Improvement of Solar-Wind based Dual-Input Cuk-SEPIC Converter for Telecom Power Supply,” Proc. of IEEE IECON-2012, Montreal, Canada.
     
149. V. Y. Vekhande and B. G. Fernandes, “Module Integrated DC-DC Converter for Integration of Photovoltaic Source with DC Micro-grid,” Proc. of IEEE IECON-2012, Montreal, Canada.
     
150. S. Anand and B. G. Fernandes, “Multilevel Open-ended Transformer Based Grid Feeding Inverter for Solar Photovoltaic Application,” Proc. of IEEE IECON-2012, Montreal, Canada.
     
151. R. Vandana, S. Nikam and B. G. Fernandes, “Criteria for Design of High Performance Switched Reluctance Motors,” Proc. of IEEE ICEM-2012, Marseille, France.
     
152. C. S. Solanki, B. G. Fernandes, B. M. Arora, P. Sharma, V. Agarwal, M. B. Patil, J. Vasi, D. B. Phatak, M. Atrey, K. Moudgalya and K. Bijlani, ““Teach a 1000 Teachers”: A Methodology for the Rapid Ramp-up of Photovoltaics Manpower required for India's National Solar Mission,” presented in IEEE PVSC-2012, Austin, USA.
     
153. B. Mangu, K. Kiran Kumar and B. G. Fernandes, “Efficiency Improvement of Solar-Wind based Dual-Input Converter for Telecom Power Supply,” Proc. of IEEE EEEIC-2012, Venice, Italy.
     
154. S. Anand, R. S. Farswan, B. Mangu and B. G, Fernandes, “Optimal Charging of Battery Using Solar PV in Standalone DC System,” Proc. of IET PEMD-2012, Bristol, UK.
     
155. N. N. V. Surendra Babu, D. Apparao and B. G. Fernandes, “A New Multilevel STATCOM based on Cascaded Two Level Inverters,” Proc. of IEEE POWERENG-2011, Malaga, Spain.
     
156. B. Mangu, K. Kiran Kumar and B. G. Fernandes, “A Novel Grid Interactive Hybrid Power Supply System for Telecom Application,” Proc. of IEEE INDICON-2011, Hyderabad, India.
     
157. V. Y. Vekhande and B. G, Fernandes, “Bidirectional Current-fed Converter for Integration of DC Micro-grid with AC Grid,” Proc. of IEEE INDICON-2011, Hyderabad, India.
     
158. R. Madhavan and B. G. Fernandes, “Novel Technique for Minimizing Torque Ripple in Axial Flux Segmented Rotor SRM,” Proc. of IEEE ECCE-2011, Arizona, USA.
     
159. R. Vandana and B. G. Fernandes, “Mitigation of Voltage Regulation Problem in Flux Reversal Machine,” Proc. of IEEE ECCE-2011, Arizona, USA.
     
160. V. Y. Vekhande, B. B. Pimple and B. G. Fernandes, “Modulation of Indirect Matrix Converter under Unbalanced Source Voltage Condition,” Proc. of IEEE ECCE-2011, Arizona, USA.
     
161. S. Anand and B. G. Fernandes, “Steady State Performance Analysis for Load Sharing in DC Distributed Generation System,” Proc. of IEEE EEEIC-2011, Rome, Italy.
     
162. B. B. Pimple, V. Y. Vekhande, B. G. Fernandes, “A New Direct Torque Control of Doubly Fed Induction Generator under Unbalanced Grid Voltage,” Proc. of IEEE APEC-2011, Texas, USA.
     
163. B. B. Pimple, V. Y. Vekhande, B. G. Fernandes, “A new direct torque control of doubly fed induction generator for wind power generation,” Proc. of IEEE IICPE-2010, New Delhi, India.
     
164. R. Vandana and B. G. Fernandes, “Optimal sizing of motor Battery system for in wheel electric vehicles,” Proc. of IEEE IECON-2010, Arizona, USA.
     
165. S. Anand and B. G. Fernandes, “Optimal voltage level for DC microgrids,” Proc. of IEEE IECON-2010, Glendale, USA.
     
166. S. Anand, B. G. Fernandes, K. Chatterjee, “A new 4-level open-ended transformer based STATCOM for high power applications,” Proc. of IEEE IECON-2010, Glendale, USA.
     
167. B. B. Pimple, V. Y. Vekhande, B. G. Fernandes, “New direct torque control of DFIG under balanced and unbalanced grid voltage,” Proc. of IEEE TENCON-2010, Fukuoka, Japan.
     
168. N. N. V. S. Babu, D. A. Rao, B. G. Fernandes, “Asymmetrical DC link voltage balance of a cascaded two level inverter based STATCOM,” Proc. of IEEE TENCON-2010, Fukuoka, Japan.
     
169. R. Madhavan and B. G. Fernandes, “A novel axial flux segmented SRM for electric vehicle application,” Proc. of XIX International Conference on Electrical Machines (ICEM), Rome, Italy, 2010.
     
170. R. Vandana and B. G. Fernandes, “Segmented switched reluctance motor with novel winding and excitation strategy,” Proc. of XIX International Conference on Electrical Machines (ICEM), Rome, Italy, 2010.
     
171. D. S. More, B. G. Fernandes, “Control and Compensation of Flux Reversal Machine for Gear less Variable Speed Roof top Wind Power Generation”, Proc. of NPEC 2010, Roorkee, India.
     
172. V. Y. Vekhande, B. B. Pimple, B. G. Fernades, “Control of Indirect Matrix Converter Under Unbalanced Source Voltage and Load Current Conditions,” Proc. of NPEC 2010, Roorkee, India.
     
173. Apparao Dekka, N. N. V. Surendra Babu, B. G. Fernandes, “Cascaded Two Level Inverter Based STATCOM with Isolated DC Sources,” Proc. of NPEC 2010, Roorkee, India.
     
174. R. Vandana, K. Saikrishna, B. G. Fernandes, “A new excitation scheme for poly phase segmented switched reluctance motor,” Proc. of IEEE ECCE-2010, Atlanta, USA.
     
175. A. Chole and B.G.Fernandes, “DC-DC power conversion using smart piezoelectric transformer,” Accepted for presentation in 6th International Energy Conversion Engineering conference (IECEC), 2008, USA.
     
176. Naresh Vattikuti, Vandana Rallabandi and B.G. Fernandes, “A Novel High Power density Segmented Switched Reluctance Machine,” Proc. of IEEE IAS-2008, Edmonton, Canada.
     
177. D. V. Ghodke, E. S. Sreeraj, K. Chatterjee and B. G. Fernandes, “One cycle controlled bi-directional AC-DC converter with constant power factor”, Proc. of PESC-2008, Rhodes, Greece.
     
178. Naresh Vattikuti, Vandana Rallabandi and B.G. Fernandes, “A Novel High Torque and Low Weight Segmented Switched Reluctance Motor,” Proc. of PESC-2008, Rhodes, Greece.
     
179. D. S. More, Hari Kalluru and B. G. Fernandes, “Design and Analysis of Outer Rotor Flux Reversal Machine for Rooftop Wind Generator,” Proc. of IEEE IAS-2008, Edmonton, Canada.
     
180. D. S. More, Hari Kalluru and B. G. Fernandes, “d-q Equivalent Circuit Representation of Three-Phase Flux Reversal Machine with Full Pitch Winding,” Proc. of IEEE PESC-2008, Rhodes, Greece.
     
181. Dharmraj Ghodke, Sreeraj E. S., Chatterjee Kishore and B. G. Fernandes, “One Cycle Controlled Bi-Directional ac to dc Converter With Constant Power Factor,” Proc. of IEEE PESC-2008, Rhodes, Greece.
     
182. D. S. More, H. kalluru and B. G. Fernandes, “d-q equivalent circuit representation of three phase flux reversal machine with full pitch winding,” Proc. of IEEE PESC-2008, Rhodes, Greece.
     
183. B. G. Fernandes, A. M. Kulkarni, S. V. Kulkarni and S. A. Khaparde, “Power engineering laboratories at IIT Bombay,” Proc. of IEEE PES General Meeting-2008, Pittsburgh, USA.
     
184. D.S. More, H. kalluru and B. G. Fernandes, “ Design and analysis of full pitch winding and concentrated stator pole winding three phase flux reversal machine for low speed application,” Proc. of National Power Electronics Conference (NPEC), India, 2007.
     
185. D. S. More and B. G. Fernandes, “Novel three phase flux reversal machine with full pitch winding,” Proc. of International conference of Power Electronics (ICPE), Daegu, South Korea, 2007.
     
186. Priya Verma and B. G. Fernandes, “Modified Sector Scheme to Overcome Flux Drooping of Direct Torque Controlled IPMSM,” Proc. of IEEE IECON-2006, Paris, France, 2006.
     
187. Dharmraj Ghodke, B. G. Fernandes and Kishore Chatterjee, “PLL-less one cycle controlled bi-directional high power factor ac to dc converter,” Proc. Of IEEE PESC-2006, Jeju, South Korea, 2006.
     
188. G. V. Jayaramaiah and B. G .Fernandes, “Novel voltage controller for stand alone induction generator using PWM-VSI,” Proc. of IEEE IAS-2006 Conference, Tampa, USA, 2006.
     
189. Dharmraj Ghodke, B. G. Fernandes and Kishore Chatterjee, “Novel soft switched high power DC-DC converter,” Proc. of IEEE PESC-2005, Brazil, 2005.
     
190. Arbind Kumar, B. G. Fernandes and K Chatterjee, “Direct Torque Control Of Open-End Winding Induction Motor Drive Using The Concept of Imaginary Switching Times For Marine Propulsion Systems,” Conf. of IEEE, IECON-2005, Raleigh, USA, 2005.
     
191. G. V. Jayaramaiah and B. G. Fernandes, “Voltage Controller for Stand-Alone Induction Generator Using Instantaneous Power Control,” Proc. of IEEE International conference on Power Electronic Systems and Application, Hong Kong, 2004.
     
192. G. V. Jayaramaiah and B. G. Fernandes, “Analysis of Voltage and frequency Controller for Grid Connected 3-Φ Self-Excited Induction Generator Using Current Controlled Voltage Source Inverter,” Proc. of IEEE, TENCON-2004 conference, Chiang Mai, Thailand, 2004.
     
193. G. V. Jayaramaiah & B. G. Fernandes, “Analysis of Voltage regulator for 3-Φ Self-Excited Induction Generator Using Current Controlled Voltage Source Inverter,” Proc. of International conference on Power Electronics and Motion Control, Xian, China, 2004.
     
194. J. S. Siva Prasad and B. G. Fernandes, “Open Loop Control of Active Commutated SCR CSI for Grid Connected Photovoltaic Systems,” Proc. of International conference on Power Systems, Nepal, 2004.
     
195. J. S. Siva Prasad and B. G. Fernandes, “Active Commutated Thyristor CSI for Grid Connected Photovoltaic Applications,” Proc. of International conference on Power Electronics and Motion Control, Xian, China, 2004.
     
196. S. K. Mishra, B. G. Fernandes and K Chatterjee, “Single Stage Single Switch AC/DC Converter With high Input Power Factor and Tight Output Voltage Regulation,” Proc. of IEEE, IECON-2004, Busan, South Korea.
     
197. J. Shukla and B. G. Fernandes, “Novel three-phase High-Quality Multi-Resonant Rectifiers operating with Zero-current-switching and constant switching frequency,” Proc. of IEEE, IAS Conference, Seattle, USA, pp.437-444, 2004.
     
198. J. Shukla and B. G. Fernandes, “A Novel Active Resonant Snubber for Single Switch Unity Power Factor three-phase Diode Rectifiers,” Proc. of IEEE, PESC-2004, Aachen, Germany, pp.3818-3823.
     
199. Arbind Kumar, B. G. Fernandes and K Chatterjee, “SVPWM-DTC of Open-End Winding Induction Motor drive With Complete Elimination of Common Mode Voltage,” Proc. of India International Conference of Power Electronics, India, 2004.
     
200. Arbind Kumar, B. G. Fernandes and K Chatterjee, “Simplified SVPWM-DTC of Three-Phase Induction Motor Using The Concept of Imaginary Switching Times,” Proc. of IEEE, IECON-2004, Busan, South Korea.
     
201. Arbind Kumar, B. G. Fernandes and K Chatterjee, “Direct Torque Control of Three-Phase Induction Motor Using SVPWM Without Sector and Angle Determination,” Proc. of European Power Electronics and Applications Conference, Latvia, 2004.
     
202. Arbind Kumar, B. G. Fernandes and K Chatterjee, “DTC of Open-End Winding Induction Motor Drive Using Space Vector Modulation With Reduced Switching Frequency,” Proc. of IEEE, PESC-2004, Aachen, Germany, pp.1214-1219.
     
203. Arbind Kumar, B. G. Fernandes and K Chatterjee “Simplified Hybrid SVM Based Direct Torque Control of Three Phase Induction Motor,” Proc. of National conference on Control Communication and Information Systems, Goa, India, pp: 137-142, 2004.
     
204. S. Vamsidhar and B. G. Fernandes, “Energy Efficient Sensor less Direct Torque Controlled Induction Motor Drive With Reduced Current Harmonics,” Proc. of IEEE Petroleum and Chemical Industry India Conference, India, pp:210-218, 2004.
     
205. S. Vamsidhar, B. G. Fernandes, “Design and Development of Energy Efficient Sensor less Direct Torque Controlled Induction Motor Drive Based on Real time Simulation,” Proc of IEEE, IECON-2004, South Korea, 2004.
     
206. S. Vamsidhar and B. G. Fernandes, “Hardware In The Loop Simulation Based Design and Experimental Evaluation of DTC Strategies,” Proc. of IEEE, PESC-2004, Aachen, Germany, pp.3615-3621.
     
207. Sandeep Bala, Nikesh Patel and B. G. Fernandes, “Reduced-Switch three phase active power filter with one cycle control,” Proc. of IEEE PESC-2004, Aachen, Germany.
     
208. A. B. Raju, B. G. Fernandes and K. Chatterjee, “A UPF Power Conditioner with Maximum Power Point Tracker for Grid Connected Variable Speed Wind Conversion System,” Proc. of IEEE Conference on Power Electronic Systems and Application, Hong Kong, 2004.
     
209. A. B. Raju, B. G. Fernandes and K. Chatterjee, “Site Matching of Wind Turbine Generators,” Proc. of National Power Systems Conference, India, 2004.
     
210. A. B. Raju, B. G. Fernandes and K. Chatterjee, “Estimation of Optimum Wind Turbine Generator Speed Parameters,” Proc. of IEEE Power Engineering Society General Meeting, Denver, USA, June 2004.
     
211. J. Shukla and B. G. Fernandes, “A new Soft-Switched Resonant Buck-type Rectifier with Constant Switching Frequency,” Proc. of IEEE, IECON-2003, Roanoke, USA, pp.1968-1975.
     
212. U. Senthil and B. G. Fernandes, “Hybrid space vector pulse width modulation based direct torque controlled induction motor drive,” Proc. of IEEE, PESC-2003, Acapulco, Mexico, pp.1112-1117.
     
213. A. B. Raju, K. Chatterjee and B. G. Fernandes, “A Simple Maximum Power Point Tracker for Grid Connected Variable Speed Wind Energy Conversion System with Reduced Switch Count Power Converter,” Proc. of IEEE, PESC-2003, Acapulco, Mexico, pp.748-753.
     
214. A. B. Raju, K. Chatterjee and B. G. Fernandes, “Modeling and Simulation of Grid Connected Variable Speed Wind Energy Conversion System,” Proc. of IPEC-2003, Singapore, pp.463-468.
     
215. A. B. Raju, B. G. Fernandes and K. Chatterjee, “UPF Power Conditioner with Simple Maximum Power Point Tracker for Grid Connected Variable Speed Wind Energy Conversion System,” Proc. of European Power Electronics and Applications Conference, France, September 2003.
     
216. A. B. Raju, B. G. Fernandes and K. Chatterjee, “Modeling and Simulation of Grid Connected Variable Speed Wind Energy Conversion System with Low Cost Converters,” Proc. of International Conference on Renewable Energy and Power Quality, Spain, April 2001.
     
217. B. N. Chaudhari and B. G. Fernandes, “Equivalent circuit of Single phase permanent magnet synchronous Motor,” Proc. of IEEE Power Engineering Society Winter meeting, Columbus, USA, 2001.
     
218. B. N. Chaudhari and B. G. Fernandes, “Steady State Performance of Poly phase permanent magnet Synchronous Motor fed from Single Phase supply system,” Proc. of IEEE Power Engineering Society Winter meeting, Columbus, USA, 2001.
     
219. B. N. Chaudhari and B. G. Fernandes, “Unbalanced operation of poly phase Line start permanent magnet synchronous motors,” Proc. of 32nd North American Power Symposium, NAPS-2000, Canada, 2000.
     
220. B. N. Chaudhari & B. G. Fernandes, “Operation of a poly phase Line start permanent magnet synchronous motor connected to a single phase supply system,” Proc. of 11th National Power Systems Conference, India, pp.237-242, 2000.
     
221. B. N. Chaudhari and B. G. Fernandes, “Effect of Voltage Unbalance on the Performance of Line Start Brushless Synchronous Motors, Part II: Asynchronous Operation,” Proc. of ICEM-2000 conference, Finland, pp.1214-1217, 2000.
     
222. B. N. Chaudhari and B. G. Fernandes, “Effect of Voltage Unbalance on the Performance of Line Start Brushless Synchronous Motors, Part I: Steady State,” Proc. of ICEM-2000 conference, Finland, pp.1209-1213, 2000.
     
223. B. N. Chaudhari and B. G. Fernandes, “Analysis of Single Phase Permanent Magnet Synchronous Motor,” Proc. of IPEC-2000, Japan, April 2000.
     
224. B. N. Chaudhari & B. G. Fernandes, “EPROM based Implementation of Sinusoidal PWM Inverter,” Proc. of IEEE-ICIT-2000 conference, Goa, India pp.278-283.
     
225. B. N. Chaudhari and B. G. Fernandes, “Permanent Magnet Synchronous Motor for Energy Efficient Drive,” Proc. of IEEE-PES conference, Singapore, 2000.
     
226. J. J. Jafar & B. G. Fernandes, “A new quasi-resonant DC-link PWM inverter using single switch for soft switching,” Proc. of IEEE IAS-1999 conference, Phoenix, USA, pp 482-487.
     
227. J. J. Jafar & B. G. Fernandes, “ Novel quasi-resonant DC-link PWM inverter using minimum number switching devices,” Proc. of IEEE IAS-1999 conference, Phoenix, USA, pp 1997-2002.
     
228. Kishore Chatterjee, B. G. Fernandes and Gopal K. Dubey, “Realization and hardware implementation of an instantaneous reactive volt-ampere compensator and harmonic suppressor system,” Proc. of International Seminar on Power Electronics and Automation, India, 1999.
     
229. J. J. Jafar & B. G. Fernandes, “A new quasi-resonant DC-link PWM inverter using single switch for soft switching,” Proc. of IEEE, APEC-1999, Dallas, USA.
     
230. J. J. Jafar & B. G. Fernandes, “Novel quasi-resonant DC-link PWM inverter using minimum number switching devices,” Proc. of IEEE, APEC-1999, Dallas, USA.
     
231. B. N. Chaudhari & B. G. Fernandes, “Investigations on Delta Modulated Inverters,” Proc. of IEEE, TENCON-99, Cheju Island, South Korea, pp.1006-09, 1999.
     
232. B. N. Chaudhari and B. G. Fernandes, “Design and Analysis of Line Start Permanent Magnet Synchronous Motor,” Proc. of International conference on rotating machines, India, pp.31-37, 1999.
     
233. B. N. Chaudhari, S. K. Pillai and B. G. Fernandes, “Energy Efficient Line Start Permanent Magnet Synchronous Motor,” Proc. of IEEE, TENCON-98, pp.379-383, New Delhi, India, 1998.
     
234. B. N. Chaudhari, B. G. Fernandes and S. K. Pillai, “A New Hybrid Rotor Geometry for Permanent Magnet Synchronous Motor,” Proc. of IEEE, PEDES’98 conference, Perth, Australia, pp.260-263, 1998.
     
235. Kishore Chatterjee, B. G. Fernandes and G. K. Dubey, “A simplified control strategy for a high power low distortion static var compensator,” Proc. of IEEE, PEDES’98 conference, Perth, Australia, 1998.
     
236. Kishore Chatterjee, B. G. Fernandes & G. K. Dubey, “Traditional versus Modern Var Compensators: Review of Status,” Proc. of National Systems conference, India, 1998.
     
237. Kishore Chatterjee, B. G. Fernandes and G. K. Dubey, “A new low distortion self-commutated static var compensator as a var source,” Proc. of International Conference on Power Quality–Assessment of Impact, CIGRE Regional Meeting. India, 1997.
     
238. Kishore Chatterjee, B. G. Fernandes and G. K. Dubey, “A novel high power self commutated static var compensator for load compensation,” Proc. of IEEE, PEDS’97 conference, Singapore, 1997.
     
239. B. G. Fernandes, S. K. Pillai and V. Subbarao,“ Performance Simulation of surface mounted permanent magnet synchronous motor fed from PWM inverter,” Proc. of Int. Power Engineering Conference, Singapore, 1993.
     
240. B. G. Fernandes, S. K. Pillai & V. Subbarao, “Performance of an adaptive hysteresis band current controlled IM drive,” Proc. of IEEE, IECON-92, San Diego, USA, 1992.
     
241. B. G. Fernandes, S. K. Pillai and V. Subbarao, “Digital simulation of an adaptive hysteresis current controlled induction motor drive,” Proc. of IEEE symposium on circuit and systems, San Diego, USA, 1992.
     
242. B. G. Fernandes, S. K. Pillai and V. Subbarao, “Design and analysis of three phase induction motor using rare earth permanent magnets,” Proc. of International conference on rotating machines, Bombay, 1992.
     
243. B. G. Fernandes and S. K. Pillai, “Programmed PWM inverter using PC for induction motor drive,” Proc. of IEEE symposium on Industrial Electronics, Xian, China, 1992.
     
244. B. G. Fernandes and S. K. Pillai, “PC controlled Transistorized PWM inverter for induction motor drive,” Proc. of IEEE-ACE 90 conference, Bangalore, India, 1990.
     

Department of Electrical Engineering
IIT Bombay, Powai
Mumbai 400 076, India
✉ bgf@ee.iitb.ac.in
☎ (Internal(O)) : (0091 22) - 2576 7428
☎ (Internal(R)) : (0091 22) - 2576 8428
🖷 (Fax): (0091 22) - 25723707
Office Room no: 032
Personal Homepage